Basic Functions; Switching The System On; Power-Saving Automatic Standby; Adjusting Volume And Sound - Philips MCB146 User Manual

IMPORTANT:
Before you operate the system, complete
the preparation procedures.

Switching the system on

●
Press STANDBY -ON 2 or SOURCE
(2 on the remote control).
➜
The system will switch to the last selected
source.
●
Press DISC, TUNER, DAB or AUX on the
remote control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY -ON 2 (or 2 on the
remote control).

Power-saving automatic standby

The power-saving feature automatically switches
to standby 15 minutes after a CD playback has
ended and no control is operated.

Adjusting volume and sound

1
Press VOL +/- to adjust volume.
➜
number from MIN 1-31 MAX.
2
Press DBB to switch bass enhancement on or
off.
➜
3
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜
●
To activate sound reproduction you can:
9
– press MUTE again;
– adjust the volume controls;
– change source.

Basic Functions

Display shows the volume level VOL and a
Display shows: if the DBB is activated.
Playback will continue without sound.
11