Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for eTIGER Secual Box V2
Summary of Contents for eTIGER Secual Box V2
-
Page 1: User Manual
Secual Box V User Manual www.etiger.com 1 / 36... -
Page 2: Table Of Contents
Contents Box contents ............................3 Design ..............................3 Features ............................... 4 Specifications ............................4 Setup Wi-Fi network settings ......................6 Step 1: Insert a SIM card in the control panel............... 7 Step 2: Turn the control panel on ..................8 Step 3: Install App and create account ................. -
Page 3: Box Contents
Box contents Control panel ES-D2A (Pet-immune motion sensor) x1 ES-D3D(Door/Window contact) x1 ES-RC1N (Remote controls) x2 AC Adapter x1 crews and anchors Documentation Design Top: Status Indicator Blue fixed: system armed Blinking blue: Home mode Blinking slowly white: connected to GSM signal Blinking rapidly white: not connected to GSM signal Bottom: Power / Network Indicator Green fixed only: Not connected to Wi-Fi router... -
Page 4: Features
Features Works with an Internet Connection (Wi-Fi Connection) Control and setup of the system on your smartphone (Android or iOS app) Notifications in case of alert and system status change SIM card slot: stay connected even where you don’t have an Internet connection or when your home Wi-Fi network is down (SIM card not included) Supports up to 10 remote controls, 100 wireless accessories with secure connection Can store up to 5 phone numbers, 5 SMS numbers (SIM card required for... -
Page 5: Setup
Setup 5 / 36... -
Page 6: Wi-Fi Network Settings
Wi-Fi network settings The Secual Box can work with a Wi-Fi connection, a SIM card or both. Wi-Fi connection: enables you to interact with your control panel by app (iOS / Android). All you need is a Wi-Fi connection at home and an Internet connection on your smartphone (Wi-Fi, 4G, 3G). -
Page 7: Step 1: Insert A Sim Card In The Control Panel
Step 1: Insert a SIM card in the control panel This step applies only if you wish to use the Secual Box with a SIM card. You will need a SIM card if you wish to interact with your Secual Box by SMS and phone call. -
Page 8: Step 2: Turn The Control Panel On
Step 2: Turn the control panel on 1. Plug the power adapter to AC socket. 2. Plug the output connector of the power adapter into the AC adapter interface. 3. Push the power switch. Step 3: Install App and create account 1. -
Page 9: Step 4: Connect To Control Panel's Ap
Step 4: Connect to control panel’s AP 1. Before you setup the Wi-Fi connection of the alarm system please make sure you are logged in in the APP. 2. Go to your Smartphone WiFi settings without closing the APP. 3. Connect the Smartphone to the alarm systems own Wi-Fi network(SSID: ESWIFI. If the ESWIFI is secured, you can reset the WIFI to factory settings by long press the connection button 5seconds until you hear 3beeps ). -
Page 10: Step 6: Connect Control Panel To The Server
Step 6: Connect control panel to the Server 1. “Alarm name”: Enter a name for the control panel. 2. “SIM card number of the alarm”: Enter the mobile number of the SIM card installed in the alarm system. This will enables you control the alarm system via SMS. 3. -
Page 11: Settings
Settings 11 / 36... -
Page 12: App Operations
APP operations Select Send Type The APP enables you control your Secual Box via WiFi or SMS, select the send type which you want to use for changing the settings. SMS: Control the Secual Box via SMS. WIFI: Control the Secual Box via WiFi network. Control the Secual Box via SMS Make sure you have set the “SIM card number of the alarm”... -
Page 13: System Settings
1. Arm, Home Mode or Disarm the system. Click alarm name to enter the operation interface. In this page you can control your alarm via the APP. 2. System Settings Click “ ” to the second page “Setting interface”, in this page you can modify the settings of your alarm via the APP. - Page 14 2.1 Save Phone numbers and SMS numbers This function enables you to determine the telephone numbers that will be called or receive SMS by your alarm in case of alert. 2.2 Rename zones Zone 1~9 can be renamed, The name of the zone cannot consist of more than 16 latin characters.
- Page 15 2.3 Entry / Exit delay This function enables you to determine a delay when you leave or enter your home during which detectors will not trigger the alarm. 2.4 Siren setup This function enables you to switch on/off the siren, and you can set the siren duration time from 1 to 9 minutes.
- Page 16 2.5 Change Password This function enables you to check and modify the system password. The password is requested when you want to control your control panel by phone call. 2.6 Change system language This function enables you to check and modify your system language. 16 / 36...
- Page 17 3. Device Information Long press Alarm name to enter “Device Information” interface, in this page you can modify the “Alarm name” and “SIM card number” , check the History and manage the User List.. 3.1 Check system History This function enables you to check the Operation and Alarm record of the system.
- Page 18 3.2 Manage Gust Account In User List interface, you can add other user account for who can control the Secual Box as a gust. Click “ Add a user account” Enter the user’s APP account and click “ ” to save. If you want to delete the gust user, click “...
-
Page 19: Change A Detector's Zone
Change a detector’s zone You can modify the zone of a detector by moving the jumpers with tweezers, according to the drawings below. The jumpers are located on each detector’s circuit board. What do zones do? Normal zone: when the system is armed, a detector on the Normal zone is active. -
Page 20: Daily Use
Daily use 20 / 36... -
Page 21: Arm The System
Arm the system When your system is armed, all detectors are active. By app Connect to your alarm and click on “Arm”. By SMS Send 1 by SMS to the phone number of the SIM card in the control panel. Only saved SMS numbers can disarm the system by SMS. -
Page 22: Disarm The System
Disarm the system When your system is disarmed, all detectors are inactive except those assigned to the 24H zone. By app Connect to your alarm and click on “Disarm”. By SMS Send 0 by SMS to the phone number of the SIM card in the control panel. Only saved SMS numbers can disarm the system by SMS. -
Page 23: Control By Phone Call
Control by phone call This function applies only if you are using the Secual Box with a SIM card. This function enables you to control your alarm system by phone call. This can especially be helpful if you are located in an area without Wi-Fi or 3G/4G coverage. How it works 1. -
Page 24: Accessories
Accessories 24 / 36... -
Page 25: Pet-Immune Motion Sensor (Es-D2A)
Pet-immune Motion sensor (ES-D2A) Features The ES-D2A is a high performance wireless motion detector boasting a digital dual-core fuzzy logic infrared control chip with intelligent analysis. This technology identifies interferences created by body motion and reduces the false alarm rate. Design Detection scope 25 / 36... - Page 26 Mounting Fix the bracket onto the wall with screws and attach the detector to the bracket. We recommend to mount the detector at a height of 2.2m. The detector is more sensitive to horizontal movements than vertical movements, and does not detect animals under 25 kg.
- Page 27 Connection to your alarm system The detectors in your kit are already connected and ready to use. If you have deleted the detector from the control panel, you can reconnect it as follows: 1.Press once on the Connection button located on the control panel. 2.Press the Test button at the back of the detector.
-
Page 28: Door / Window Detector (Es-D3D)
Door / Window Detector (ES-D3D) Design Transmitter Magnet LED indicator Distance Holder There are 3 sizes distance holder in the package, it is clickable to each to reach more distance options, for different window frame depths where user will mount the Magnet. Heights(mm) Holder 14.5... - Page 29 Mounting Mount the magnet 1 cm away from the transmitter and secure the transmitter and magnet with double-sided tape on the door and the door frame respectively. Connection to your alarm system The detectors in your kit are already connected and ready to use. If you have deleted the detector from the control panel, you can reconnect it as follows: 1.Press once on the Connection button located on the control panel.
-
Page 30: Remote Control (Es-Rc1N)
Remote control (ES-RC1N) Design Disarm LED indicator Home Mode Connection to your alarm system The remote controls in your kit are already connected and ready to use. If you have deleted a remote control from the control panel, you can reconnect it as follows: 1. -
Page 31: Connecting Additional Accessories
Connecting additional accessories Connecting additional detectors / controls Additional sensors can be connected to the system. Sensor types include – Motion Sensors, Pet Immune sensors and door window sensors. Syncing additional sensors follows the same methodology as that mentioned above. Connecting additional Siren 1. -
Page 32: Precautions
Precautions 32 / 36... -
Page 33: Precautions
Precautions For a safer use of the product and to optimize the lifespan of the product, we recommend you to follow the precautions below: - The wireless accessories must be connected to the control panel. - Low power voltage may affect transmission distance. - Do not press the SOS key on the remote control if it is unnecessary to avoid disturbing neighborhood. -
Page 34: Warning
Warning ATTENTION RISK OFELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage”... -
Page 35: Normes
European Technical Adaptation Committee (TAC). Manufactured in China. Images, illustrations and text are non-contractual. eTIGER and the eTIGER logo are registered trademarks and the property of eTIGER. Copyright . 2016 eTIGER. All rights reserved. 35 / 36... - Page 36 EUROPE Pachtgoedstraat 2, 9140 Temse, Belgium service@etiger.com 36 / 36...
Need help?
Do you have a question about the Secual Box V2 and is the answer not in the manual?
Questions and answers