Home Screen; Changing The Language - Simbans TANGO Quick Start Manual

Charge the Tablet
The Tablet comes with a built-in rechargeable lithium-polymer battery. It is recommended to fully charge
the battery before first use.
 To charge the Tablet, plug the charger to an electrical socket with the other end of the adapter
inserted to the microUSB input slot on the Tablet (Refer to Step 1 on the previous page).
 You may continue to use the Tablet while it is charging. You may stop charging any time even when
it is not 100% charged.

If the Tablet is powered on, the battery charge status will be
indicated at the top right corner of the screen by the battery
meter. If the Tablet is powered off, it will charge until the
battery is full.
 When the battery life runs out, the battery meter turns red and the device needs to be charged
soon. It will continue to operate as usual until it drops to 0%.
 Disconnect the power adapter when the Tablet is fully charged.
Note: When the Tablet is connected to a computer via the USB cable, the battery will charge via the USB
socket, but at a much slower rate than the power adapter supplied.
Do not use any other power adapters than the one supplied. Using an incompatible power adapter
could damage the tablet and poses the potential risk of fire.
Turn on the Tablet
 Press the power key circled in red for 5 seconds.
 Wait for about 30 seconds for Android to load and start.
 The Tablet will guide you through the basic setup.

Home screen

When you first turn on and unlock your tablet, you will get to the home screen. Each icon
represents an application (app). Whenever you want to return to the home screen, you
can press the Home button on the left side on the device or tap on the home button
located at the bottom of the screen (white circle icon).

Changing the language

The default language of the Tablet is English. To change the language:
 Go to Settings by pressing icon on Home screen
 Scroll to Personal section => Select Language & Input => Tap on Language
 Select desired language
Connect to Wi-Fi
 Go to Settings by pressing icon on Home screen
 Under Wireless & network section => Select Wi-Fi
6