Related Manuals for Auto Page autopage RS-850lcd
Summary of Contents for Auto Page autopage RS-850lcd
- Page 1 JAN/07/2003 RS-850lcd PROFESSIONAL REMOTE CAR STARTER WITH ALARM SYSTEM & 2-WAY LCD COMMUNICATION OPERATION MANUAL THIS PRODUCT IS DESIGNED FOR PROFESIONAL INSTALLATION ONLY RS850 OP...
-
Page 2: Table Of Contents
A. REMOTE TRANSMITTER OPERATION …………………….………. 4 B. BUTTON LOCK ……………………………………………….……...…. 5 C. LED DISPLAY .……………..……..……………………….……………. 5 D. CHIRP INDICATOR ..………..………..……………………………..…. 5 E. PARKING LIGHT ………..………………………………………..….…. 6 F. ALARM OPERATION CONDITION .…..…………………………...…. 6 G. ACTIVE ARMING – ARM & LOCK .……..……………...……………. 6 Defective Sensor Reminder Silent Arming / Disarming Shock Sensor By-Pass... - Page 3 U. TRUNK RELEASE (CHANNEL 3) OUTPUT ………..……….………13 V. CHANNEL 4 TIMER CONTROL OUTPUT ………..…………………13 W. CHANNEL 5 TIMER CONTROL OUTPUT ………..……………….. 13 X. CHANNEL 6 TIMER CONTROL OUTPUT ………..………………... 13 Y. POWER ON MEMONRY: ………..…………...………….…….…..…. 13 A. TO REMOTE START THE VEHICLE ………..…………..…………. 14 Safe Start (Child safety mode) B.
-
Page 4: Remote Transmitter Operation
As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control. 3. -
Page 5: Button Lock
LCD DISPLAY TRANSMITTER OPERATION ONLY: Transmitter Button Warning: Press the compartment is empty, then insert the new battery. B. BUTTON LOCK: It is useful if you want to disable the transmission function of the remote control temporarily to prevent from any inadvertent pressing of buttons by others. -
Page 6: Led Display
C. LED display: Function Disarmed Slow Armed Flash Flash Passive Starter Disable Fast Flash Passive Arming On (Solid) Valet Mode D. CHIRP INDICATORS: Chirp Function 1 chirp 2 chirps Disarm 3 chirps Defective Reminder 4 chirps Disarm / Triggered 6 chirps Car Locator F. -
Page 7: Passive Arming
System Arm Door Ajar DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. (See Alarm Feature “I - 4 Programming) SILENT ARMING / DISARMING: Press the transmitter the same time will arm or disarm your security system, No chirp sound will be heard, arm / disarm confirmation will be through the vehicles parking lights only. -
Page 8: Active Disarming - Unlock & Disarm
I. ACTIVE DISARMING – UNLOCK & DISARM: 1. Press button on the transmitter. 2. The siren will chirp twice and parking light flash twice to indicating that the security system is now disarmed. The vehicle’s door will unlock and dome light turns on for 30 seconds upon disarming when interfaced with the security system. -
Page 9: Overrides The Alarm Without Password Pin Code
OVERRIDES THE ALARM WITHOUT PASSWORD PIN CODE: (Factory Default Setting) The Override function may be used if the remote transmitter is lost or inoperative. 1. Enter the vehicle and turn the ignition switch to 'ON’ position. 2. (Alarm will sound.) 3. -
Page 10: Exit Valet Mode
system must first be disarmed either by using your remote transmitter, or by operating the Manual override sequence. Enter Valet Mode: 1. From the disarmed condition, turn the ignition to “ON” position. 2. Push and hold valet switch for 2 seconds until the LED turns on. -
Page 11: Trigger The System
N. TRIGGER THE SYSTEM When armed, your vehicle is protected as follows: 1. Light impact will trigger the warn-away signal. 2. Heavy impacts / Doors open / Hood open / Trunk open / Turn on the ignition key will trigger the programmed sequence. The starter disable relay (if installed) prevents the vehicle’s starter from cranking. -
Page 12: Anti Car- Jacking
O. ANTI CAR- JACKING Warning: If you don't need the car jacking function in this alarm system, be sure to set car jacking feature “OFF”. This system is default setting all car-jacking “OFF”. (See Alarm Feature I - 6 Programming.) ACTIVE ANTI CAR JACKING: 1. -
Page 13: System's Trigger Check
P. SYSTEM’S TRIGGER CHECK Press the transmitter (C) button. It responds with one melody sound and all trigger’s records will immediately displayed on the LCD screen. Q. SYSTEM’S STATUS CHECK When you want to check the system’s present status through the LCD screen, Press the transmitter button twice, within 3 seconds press It responds with one melody sound. -
Page 14: Rs850 Op
1. Press the transmitter seconds press driver paging function, It responds with chirps of the vehicle, a melody sound and " on the LCD screen to confirm the function is on. 2. When tapping the paging (knock) sensor, one chirp sound shall be emitted from the vehicle and the paging melody sound continues sounding from you Remote LCD Transmitter and “... -
Page 15: Channel 5 Timer Control Output
Press the transmitter Channel 4 function. Channel 4 is user-programmable timer output. You may program the built-in timer to send a ground signal for any time duration from 1 second to 120 seconds. For instance, this timer output may be used to turn on the headlight, power window or sunroof. -
Page 16: Safe Start (Child Safety Mode)
When you want to start your vehicle, 1. Press button once on the transmitter. 2. The parking light will activate to indicate the remote start received the signal. 3. The engine will start approximately 5 seconds. 4. Once the engine is running, after couple seconds the parking light will turn on again and climate controls will activate and adjust the vehicles interior temperature to your preset setting. -
Page 17: 3 Hours Timer Start With Temperature-Control Off
1.Before turning off the engine, press the and the LED indicator will flash 3 times to confirm enter. 2.Turn the ignition key to OFF position. (The engine will stay running.) 3.The engine will run until the pre-programmed time elaps ed or shutdown input is received. -
Page 18: Temperature Check
parking light will flash (6) times. The siren chirps (6) times. The vehicle is now programmed to start at the real time of the next day. Your set time for the next day engine start flashes for approx. 3 seconds on the LCD screen. -
Page 19: Disabling The Remote Start System
The hood is opened. The brake pedal is pressed. Engine is over-revved. {“Tachometer checking type” only} The pre-programmed run ti me (5 /10 / 20 / 30 minutes) has elapsed. Press button once on the remote transmitter under remote start mode . -
Page 20: Battery Replacement
A. BATTERY REPLACEMENT: A 1.5V type AAA Alkaline battery powers the Remote Transmitter. When the power of the battery weakens a displayed on the LCD screen. When the old battery is replaced to new one, there will be beep sounds indicate the power is up and the clock on the LCD screen returns to AM12:00 after displaying all the icons. -
Page 21: The Remote Lcd Icons With Function
B. THE REMORE LCD ICONS WITH FUNCTION: Door Lock Your vehicle doors are locked Armed Mode Your vehicle is in armed mode Remote Transmission You are transmitting the signal to control unit Door Open Warning Doors are illegally opened (Zone 3) Shock Sensor Trigger Trigger on Shock... -
Page 22: Rs850 Op
Vibration Mode Remote Control vibrates when the system is triggered Driver paging Someone is paging you in front of your vehicle C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER: Transmitter Button (1 second) (3 seconds) (5 seconds) (2-second) (2-second) (2-second) (2-second) RS850 OP JAN/07/2003 Description... -
Page 23: Screen Lamp On
1. Screen Lamp ON: melody sound and the LCD screen lamp will turns on for 5 seconds 2. Power Save Mode: transmitter uses “0” current to save the battery power. Entry: 1. Press & hold the melody sound and entry the “power save mode”. 2. -
Page 24: Enable / Disable Bi Sound While Pressing Button
It is useful when you are in a noisy place and difficult to hear beep sound from the remote control as the remote control in this mode, vibrates itself if your security system is triggered. Press the button first, within 3 seconds press and hold the ) button for 2 seconds to select the mode of vibration or melody, the... -
Page 25: Alert Alarm Timer Setting
Press & Hold the button for 3 seconds Press the once Press the once. Press the once Press the once Press the once Press the once Press the once Press & hold the button for 2 seconds. EXIT: Press and hold the the system will exit the programming mode. - Page 26 1. Press & hold the the “Hours” digit flashes for adjusting. 2. Press the “Hours” digit is flashes for adjusting. 3. Press the PM 6:xx 4. Press the button once again then the “Minutes” digit flashes for adjusting. 5. Press the PM 6:30 6.
- Page 27 Press the button to stop the count down timer, and the “OFF” icon will show on the LCD screen. 8. Press the confirm exit the timer program mode. Note: Maximum is 19 hours. 4. Time Set-Up For “Daily Timer Start”: Example to AM 6:30 1.
- Page 28 LIMITED LIFETIME WARRANTY PROVISIONS AutoPage, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery. Your AutoPage equipment is guaranteed for “life” to the original purchaser/user of the equipment under the following conditions: If the product proves defective (according to AutoPage’s testing) within the first year, the defective unit may be exchanged or repaired free of charge.
-
Page 29: Important Note
IMPORTANT NOTE: installation performed by anyone other than a professional installation technician authorized by a dealer of Auto Page will void the product’s warranty. This WARRANTY CARD is for your record. However, AutoPage reserves the right to request you to submit this WARRANTY CARD, which must have complete information to receive warranty service. - Page 30 Serial # _______________ CUSTOMER TO COMPLETE Mr./Mrs./Ms. ___________________________ ________________________________ Your Name (Please Print) ___________________________ ________________________________ Address ___________________________ ________________________________ City, State, Zip Code ___________________________ ________________________________ Telephone Number ___________________________ ________________________________ Year / Make / Model of Vehicle “Proof of Purchase” which includes the store name and date of purchase must accompany all warranty returns.
- Page 31 JAN/07/2003 1815 West 205 Street Suite 101 Torrance, California 90501-1525 Main Office: 310-618-2002 Customer Service: 800-262-2527 Ext. 462 www.autopageusa.com RS850 OP...
Need help?
Do you have a question about the autopage RS-850lcd and is the answer not in the manual?
Questions and answers