Getting Started Powering the Device When using your nüvi for the first Connect your device to the vehicle time, complete the following tasks. power cable while it is plugged into your vehicle. 1. Power your device (page 2). Your nüvi charges as you drive. 2.
Mounting Your Device Mount Suction cup mount WARNING This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, remove the device from Speaker Vehicle power the vehicle when exiting or store it cable out of direct sunlight.
Configuring your Device Front Cover Power button 1. Plug the vehicle power cable into Microphone the mount. 2. Plug the other end of the vehicle power cable into a power outlet in your vehicle. Your unit should turn on automatically if it is plugged in Speaker Micro-B connector and the vehicle is running.
3. Touch Done. ➐ Touch to make a call when 4. Select a destination. connected to a compatible 5. Touch Go!. mobile phone. See www.garmin .com/bluetooth for information. Searching Near Another ➑ Touch to activate Voice Command Location 1. From the Main menu, touch ➒...
Page 6
Using the On-Screen You can also use the on-screen handwriting pad to enter characters Keyboard & Handwriting in English, simplified Chinese, and traditional Chinese. When an on-screen keyboard appears, touch a letter or number to enter it. Touch to add a space. Touch ◄ and ►...
Following Your Route ➎ Touch to change the data field. Your route is marked with a magenta ➏ Touch to view the Where Am I? line on the map. If you depart from page. the original route, your device ➐ Touch and drag the map to view recalculates the route.
Adjusting the Screen Taking a Detour Before you can take a detour, you Brightness must be navigating a route. 1. Touch Tools > Settings > Display > Brightness. 1. Touch to return to the Main menu. 2. Touch and move the scroll bar to adjust screen brightness.
2. Press ASR icon. The voice severity of traffic conditions on your route or on the road you are traveling. command menu appears. NOTE: Garmin is not responsible for Tips for Using Voice the accuracy of the information. Command • Talk in a normal voice directed at...
4. Touch the button below Phone. The device repeats the name of the place as it is searching. 5. Touch OK. A list of locations appears. 6. Select your phone, and touch OK. 4. Speak the line number of the 7.
® device in sleep mode. owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under license. Mac is a ® • Press and quickly release the trademark of Apple Computer, Inc., registered in Power button and double-tap the U.S.
Need help?
Do you have a question about the nuvi 3790 and is the answer not in the manual?
Questions and answers