Assembling Cubii - Cubii F3A1 Product Manual

F3A1 Cubii Smart Under-Desk Elliptical

Assembling Cubii

Here's an instruction on how to assemble Cubii after you unbox. Refer to the
section "What's Included" for a complete list of components. It is also
recommended that you assemble Cubii with a friend, family member or
colleague to help secure the pedals in place while you screw them in.
1. Place the right pedal on top of the right shaft so that the screw holes
are aligned. Refer to the diagram above
2. Keeping the pedal in positon, flip it over by the hinge so the pedal is
underneath the shaft and the screw holes are exposed on top.
3. Screw the pedal in by using the screwdriver. Make sure that the pedal is
secured tightly to avoid noise, risk of damage, and injury.
4. Repeat steps 1-3 for the left pedal.
In case you have trouble assembling, here is a video to help you get
started: mycubii.com/tutorial
mycubii.com
support@mycubii.com
6