Parameter Setting With "Global Drive Control" (Gdc) - Lenze ECS series Operating Instructions Manual

7.2

Parameter setting with "Global Drive Control" (GDC)

With the "Global Drive Control" (GDC) parameterisation and operating program, Lenze
provides a plain, concise and compatible tool for the configuration of your
application−specific drive task with the PC or laptop:
The GDC input assistant offers a comfortable motor selection.
ƒ
The menu structure supports the commissioning process by its clear structuring.
ƒ
Fig. 7−1
,
More detailed information ...
is given in the documentation on the parameter setting and operating
program Global Drive Control (GDC).
EDBCSXE040 EN 8.0
Parameter setting with "Global Drive Control" (GDC)
0
5
X4
Using the GDC
0
Lenze parameter setting program "Global Drive Control" (GDC)
1
PC or laptop
2
PC system bus adapter (EMF2173IB/EMF2177IB) with connection cable
3
Sub−D plug with 3−pole cable
4
3−pole plug (CAG ˘ CAL ˘ CAH) from connector set ECSZE000X0B
5
Power supply module ECSxE
l
Parameter setting
1
2
4
3
ECSXE453
7
71