Apst (All Preset) Reset To Factory Setting; Control And Display Elements In The Structuring Mode Apst - Siemens SIPART DR21 Manual

5 Operation
5.4 Configuration modes
5.4.7

APSt (All Preset) Reset to factory setting

APSt serves to reset all controller functions (parameters and structures) to the factory setting.
We recommend you to run the APSt function first if major changes are to be made to the con-
figuration. The controller is in offline operation in the structuring mode.
NOTICE
The APSt function cannot be canceled.
2
Striped pattern
ID offline
1
Controlled
variable x
Display 3
no or YES
9
PS
(Parameteriza-
tion/structuring)
Figure 5-8

Control and display elements in the structuring mode APSt

No appears after jumping to the structuring mode APSt with the Enter key (11). Set YES with
+Δw key (14, 15) and press the Enter key (11) until the configuration mode StrS appears. The
Preset function is run. Select structuring mode Strs by pressing the Enter key and re-structure
the controller.
The offline and online parameters must also be reset.
178
SIPART DR21
PV SP
X W
C
100
ADAPT
A1
A2
SP-W
50
A3
A4
0
W
X
OUT-Y
SIEMENS SIPART DR21
7 8
no function
17
Internal LED: current status
16
Exit key ↗ : Return to selection mode
after APSt
18
Exit LED: flashes
19
Adaptation LED: off
15
Adjustment no or YES, set YES
14
12
Manual LED: ON (manual operation)
11
Enter key ↗ : until configuration mode
StrS appears
13
Enter LED: flashes if YES
6
Shift key: no function
4, 5
both LEDs: no function
C73000-B7476-C143-08
Manual
SIPART DR21