Summary of Contents for Immersion RC TNR Mini-Wand
- Page 1 Mini-Wand : Personal Edition Preliminary Operator's Manual International edition, Rev 0.9 - Sept 2016...
-
Page 2: Specifications
Storage Temperature Operating Temperature Introduction The ImmersionRC TNR Mini-Wand is a unique touch-free tool for programming video transmitters for FPV Racing. The unique T ouch’N’Race (TNR) system was designed with the following goals: 1) Eliminate DIP switches as a way to set vTx frequency 2) Eliminate confusing button/LED UIs as a way to set vTx frequency 3) Allow transmitter frequency to be both queried, and set ... - Page 3 Touch’N’Race (TNR) for Casual Use When arriving at a local park, and asking what frequencies other pilots are using, a TNR wand may be used to safely set a Tramp HV, or other TNR-equipped quad to an unused frequency, and appropriate power level.
- Page 4 Using the Wand - Personal Edition The TNR wand is operated using a joystick and the Program button. The joystick navigates within the on-screen menu. The Program button executes the action selected on-screen. The power button powers-up the wand, and an automatic shut-down turns it off after 5 minutes idle time (or optionally via the menu).
- Page 5 Set Freq Menu Set Freq/Pwr IRC CH1 5740MHz@25mW Program button to set the frequency. Left/Right stick to select frequency. Up/Down to select power level. Press joystick to go back to the F ly m enu. Start Heat Menu Start Heat Pilot #1 Race 1...
- Page 6 Nbr of Pil(ot) Menu Set the number of pilots in the heat. Each with a pre-programmed frequency and power level Number of Pilots Joystick up/down to change the number of pilots in the heat. | Press joystick to go back to the F ly m enu. Pilot Freq Set the power level and frequency for each pilot in a heat.
- Page 7 Check Com(munication) menu This option allows the complete communication path between wand, NFC tag, and Tramp to be tested. Very useful in a race event where a cabling problem is suspected. This tests that the Tramp is powered, the cable to the tag is intact, and not broken in any way, and that the tag is fully operational and has not been damaged.
-
Page 8: Best Practices
Regional Locking In order to ensure that our hobby/sport remains legal worldwide, ImmersionRC, and it’s resellers, are forced to follow certain rules regarding use of the radio spectrum. Because of this, there are three variants of the Tramp HV (and other ImmersionRC products that emit RF). - Page 9 Bands, Channels, and Frequencies It is highly recommended to understand the rules and regulations in your country before using any video transmitter. Transmitting outside a legal band is something frowned upon by the authorities, and may result in a fine, or confiscation of equipment. As a rule of thumb, the following charts should help understand which frequencies are legal in each of our main markets.
-
Page 10: Firmware Updates
Firmware Updates In the unlikely event that the firmware in your mini-wand requires an update, use the following procedure: 1) Power down the wand 2) Hold down the P rogram button and connect via USB to a Windows/OSx PC 3) Download the firmware from the mini-wand page on the ImmersionRC Website 4) Install the firmware using the ...
Need help?
Do you have a question about the TNR Mini-Wand and is the answer not in the manual?
Questions and answers