Honeywell CT50 User Manual page 47

DRAFT
Data Processing Settings (continued)
Setting
Data Editing Plugin
Symbology Prefix
Launch Browser
Scan to Intent
Launch EZ Config
Dolphin CT50 Mobile Computer User Guide
Description
Specify a Total Freedom data editing plug-in.
Specify a symbology identifier prefix to the bar code
data. Options include:
• None
• Honeywell
• AIM
Enable or disable URL bar code handling. If a bar code
starts with http:// or https://, the browser opens using the
bar code data as a URL.
Corresponds to BarCodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH-
BROWSER
Enable or disable special handling of scan-to-intent bar
codes. Applies to bar codes in one of the following
formats:
'//' ACTION
'//' intent-suffix '$' extra-data
Where:
ACTION and extra-data are any string of characters.
Launches an application listening for the intent:
Intent action: "com.honeywell.scantointent.intent.action."
+ ACTION
Intent extra
"com.honeywell.scantointent.intent.extra.DATA" contains
the remainder of the bar code data after the first '$'
character.
Corresponds to BarCodeReader property:
PROPERTY_DATA_PROCESSOR_SCAN_TO_INTENT
Enable or disable special handling of EZConfig bar
codes. Applies to EZConfig bar codes, which are
encoded with the Aztec symbology and containing
specific header data.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH_EZ_
CONFIG
Chapter 3 — About the Scanner
Default
None
None
Enable
Enabled
Enabled
39