Connection To The Water Supply - Miele WTH 120 WPM Operating Instructions Manual

Connection to the water supply

The washer-dryer should be connected
to the mains water supply in
accordance with current local and
national safety regulations. The German
authorities do not require it to have a
non-return valve as the washing
machine has been designed to comply
with DIN regulations.
The machine is designed to operate
with a flow pressure of between 100
and 1000 kPa. If it is higher than
1000 kPa it is essential to fit a pressure
reducing valve.
Connection to the mains water supply
should incorporate a mains stopcock
with 3/4" threaded union. The stopcock
should be fitted by a qualified plumber.

The screw connection is subject
to mains water pressure.
Turn on the stopcock slowly and
check for leaks. Correct the position
of the washer and union if
appropriate.
The washer-dryer is not suitable for
connection to a hot water supply.
Installation and connection
Maintenance
Only use a genuine Miele hose that has
been tested to withstand pressure of at
least 14,000 kPa should you ever need
a replacement.
The dirt filter in the open end of the
inlet hose must not be removed.
Extension hose
A 1.5 metre long (metal) extension hose
is available from your Miele dealer or
the Miele Spare Parts Department as an
optional extra.
99