Deleting Ip Cameras; Other Instructions; Settings Management - GW Security GW-NVR3208E User Manual

(PLEASE NOTE: After adding the cameras successfully, it will only appear on the connected IP Cameras list and won't appear on the list
of available IP Cameras).
6.5.2.

Deleting IP cameras

The delete option applies to connected cameras only. You can delete one-by-one or delete all cameras at once.
1. To delete IP Cameras one-by-one: on the list of connected IP Cameras, click on " " and select "Yes" when prompted.
2. To delete all cameras at once: To delete all connected cameras, click "Delete All" and select "Yes" when prompted.
PLEASE NOTE: After the camera is deleted, it will be moved back to the available camera list on the upper half of the interface.
6.5.3.

Other Instructions

1. IPC Preview: Hover the mouse cursor over the preview icon ("
Please note: This function is only available if the IPC supports snapshots. (24 CH NVR such as 2224E, 2424E do not support this function)
2. Refresh: Left-click the "Refresh" button once to refresh the available IP camera list.
3. Flip pages: When there are multiple IP Cameras in different pages, left click the " " or " " icon to flip pages.
4. Status: The connection status of an IP camera is color-coded. Red: Abnormal, the IPC is disconnected and there is no video signal.
Green: Normal, the IPC is successfully connected and currently online. Orange: A certain channel is abnormal, but the video images can
still be displayed in general.
5. IP channel diagnosis: Left-click the " " icon and enter the IPC diagnosis interface which will allow you to diagnose video streams.
6. IP channel information: Left-click the "
addresses, current resolution of the mainstream, the status, protocol, port, manufacturer, model and hardware version of the IPC.
7. IP channel editing: Left-click on the "
username/password.

6.6. Settings Management

Settings Management includes: General settings, Time settings, Output settings and Network settings, as shown below:
Officials Website: www.gwsecurityusa.com
Email: support@gwsecurityusa.com
Business Hour: Monday-Friday from 9:00am-5:00pm PST
Tel: 626-350-0555
"), a preview window will then pop up.
" icon to enter the IP channel information interface. Channel numbers, channel names, IP
"icon to enter the IP channel settings interface to change the IP address and the
24