Table of Contents
Advertisement
Quick Links
CLEARWAVE
WATER CONDITIONER
®
MODEL: CW-125
The ClearWave
Water Conditioner is the solution to scale build-up due to hard water.
®
The ClearWave installs easily and virtually eliminates scale build-up in pipes, faucets, and appliances.
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.
Please retain these instructions after installation.
Installed By:
Phone:
Installation Date:
www.fieldcontrols.com
Advertisement
Table of Contents
Summary of Contents for ClearWave CW-125
- Page 1 Water Conditioner is the solution to scale build-up due to hard water. ® The ClearWave installs easily and virtually eliminates scale build-up in pipes, faucets, and appliances. READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION. Please retain these instructions after installation.
-
Page 2: Table Of Contents
Under these conditions an iron removal system is required to filter out the iron prior to the ClearWave. We recommend an iron removal system for total iron levels above 0.3 ppm (parts per million). -
Page 3: Customer Satisfaction & Warranty Registration
If your water falls under the description of Soft or Slightly Hard the effects of the ClearWave on the scale (if any) will not be noticeable. Any water problem you have is probably not caused by calcium or magnesium. -
Page 4: Operation Timetable
Mounting the unit to the pipe Mount the ClearWave onto the pipe by routing a wire tie through the two holes on each end of ClearWave housing base. (See Figure 1) The performance of the ClearWave is not affected by the direction or orientation. -
Page 5: Properly Wrapping The Antennae
Insert the power supply terminals onto the power supply screw terminals and fasten securely. Plug the power supply into a standard electrical wall outlet. (See Figure 2) When energized, the ClearWave modulation indicator lights start flashing sequentially indicating that the ClearWave is functioning properly. -
Page 6: Troubleshooting
ClearWave. Mount the ClearWave prior to the softener for best results.USAGE Q. How many ClearWave units do I need for my home and what is the maximum pipe size it can be used on? A. One ClearWave will satisfy the requirements of most homes, since most homes have water mains of 1 inch or less. - Page 7 Q. When I move, can I take the ClearWave with me? A. Yes. Since there is no plumbing involved with the installation of the ClearWave, removal is as easy as unwrapping the antennae and unplugging the unit.
-
Page 8: Limited Warranty
LIMITED WARRANTY Field Controls, LLC (“Company”) warrants that its products shall be free from defects in material and workmanship under normal use for the limited period indicated, from the date of manufacture, subject to the provisions 1-8 below. Eighteen (18) months All Field Controls Products (except for those listed below as 5 years or 90 days). -
Page 9: Warranty Registration Form
Very Heavy 2. Had you installed an Iron filter prior to ® purchasing the ClearWave 3. Where did you purchase the ClearWave? 4. Date purchased 5. Mfg. date code Briefly describe any current water problems; scale build up, odor, taste, Hardness Level staining, etc... - Page 10 Phone: 252.522.3031 • Fax: 252.522.0214 www.fieldcontrols.com © Field Controls, LLC P/N 46402200 Rev D 09/11...
Need help?
Do you have a question about the CW-125 and is the answer not in the manual?
Questions and answers