Epson TM-U675 Service Manual page 171

Confidential
2. While pressing the tab of the lever drive coil (type B), rotate the lever motor reduction gear
in the direction indicated in the illustration, so that the protrusion on the lever drive gear
faces the very bottom of the printer.
Lever drive gear
3. Remove your finger from the claw of the lever drive coil (type B). Check that the claw
returns to its original position. Redo from step 1 if it has not returned to its original position.
Rev.D
TM-U675/U675P (with autocutter) Service Manual
A
A
Lever drive gear protrusion
Figure 3-2
Figure 3-3
Lever drive coil (type B)
Lever motor reduction gear
A
Adjusting and Setting 3-3