Panasonic VL-SV71 Installation Manual
Video intercom system
Hide thumbs
Also See for VL-SV71:
- Important information and quick manual (16 pages) ,
- Quick start manual (2 pages) ,
- Operating instructions manual (34 pages)
Advertisement
R This guide is for use with the above 4 models.
R The Installation Guide in Indonesian can be accessed from the following site:
https://panasonic.net/cns/pcc/support/intercom/sv71
R Door station is described as "doorphone" and Main monitor station is described as "main
monitor" in this guide.
R In this guide, the suffix of each model number (e.g., the "BX" in "VL-SV71BX") is omitted
unless necessary.
Note to the installer
R Before attempting to connect or operate this product, please read the label on the rear of
the doorphone and the main monitor/extension monitor.
R Please read this guide carefully, and install the product safely and correctly by following
the instructions. Carefully read the information found in the section titled "For your
safety" in particular.
R Only use attachments/accessories specified by the manufacturer.
R The installation shall be carried out in accordance with all applicable installation rules.
R To the maximum extent permitted by law, Panasonic assumes no responsibility for
injuries or property damage resulting from failures arising out of improper installation
or operation inconsistent with this document.
R After installation, make sure to leave this guide with the customer.
Model Name
Video Intercom System
Main Monitor Station
Door station
Installation Guide
Main monitor station
Model No.
Model No.
VL-SV71
VL-SV72
VL-MV71
VL-MV72
Advertisement
Table of Contents
Related Manuals for Panasonic VL-SV71
Summary of Contents for Panasonic VL-SV71
-
Page 1: Installation Guide
R Only use attachments/accessories specified by the manufacturer. R The installation shall be carried out in accordance with all applicable installation rules. R To the maximum extent permitted by law, Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this document. -
Page 2: For Your Safety
RDo not use the supplied power supply For your safety unit for outdoor installations (it is for indoor use only). To prevent severe injury and loss of life/ RDo not install the main monitor/ property, read this section carefully extension monitor in the following before using the product to ensure places: proper and safe operation of your... -
Page 3: Supplied Accessories For Installation
(for doorphone and other connections): Prepare wires of the appropriate specification. (a"Wire type and length") Note: R The illustrations in the supplied manual(s) may vary slightly from the actual product. *1 VL-SV71/VL-SV72 models only *2 VL-SV72/VL-MV72 models only... -
Page 4: Precautions For Installation
Precautions for installation To avoid malfunction or communication disturbances, do not install the doorphone or the main monitor/ extension monitor in the following locations: – Places where vibration or any other kind of impact occurs. – Places where echoing is frequent. –... -
Page 5: Wiring Schematic Diagram
Wiring schematic diagram Set up correctly according to the following wiring schematic diagram and "Wire type and length". R For information, such as order numbers, about optional devices that can be connected to, refer to the "Additional/replacement accessories" section in the Operating Instructions. DOORPHONE 1 DOORPHONE 2 You can also connect an... - Page 6 Wire type and length Wire type Wiring run Diameter Length (Max.) ø 0.65 mm 22 AWG 100 m Doorphone – Main monitor – ø 1.0 mm 18 AWG 130 m Extension monitor ø 0.5 mm CAT 5 50 m ø 0.65 mm 22 AWG 10 m Main monitor –...
- Page 7 Connecting an optional lobby station VL-V590 Lobby station MAIN MONITOR <Rear view> Ml-1 Ml-2 MO-1 MO-2 MO-3 MO-4 MO-5 MO-6 NP: Non-polarised <Be sure to perform the following to ensure proper operation> R Connecting an optional VL-V590 lobby station – Connect terminal D1/D2 on the main monitor with terminal D1/D2 on the lobby station. –...
-
Page 8: Doorphone Installation Position
Doorphone installation position Installation position of the doorphone and camera range Views when the camera is facing forwards at 0° (default). R Example: Installation height is 1450 mm (standard position). (Units: mm) A view when looking from above A Image range B Approx. 66° C Centre of doorphone D Approx. 1450 E Approx. 500 F Approx. -
Page 9: Installing The Doorphone
Attach the mounting base (A) to the wall Installing the doorphone securely using the wood screws (B) (accessory). Important: R Install the mounting base on a vertical flat R On the bottom surface of the doorphone and the wall. mounting base, there are holes to allow water to R Before drilling, refer to “Precautions for drain. - Page 10 Examples of camera angle B Mount the doorphone to the mounting base. Fasten the screw, then close the Facing forwards Facing upwards screw cover (C). Facing right Facing upper right R The angle can also be adjusted to the left or upper left.
- Page 11 Power supply unit (with cable cover Installing the power supply removed) Top view Bottom view unit (VL-SV72AZ, VL- MV72AZ models only) About the installation location R The AC cable plug is used as the main disconnect device. Ensure that the power outlet is installed near the product and is easily accessible.
- Page 12 Attach to the DIN rail Attach in the order described below so that hook Main monitor/extension (A) is positioned at the bottom. monitor installation position Hang hook (B) on the DIN rail (C). Pull and hold the lever down (D). About the installation position of the main monitor/extension monitor and mounting Secure hook (A) to the DIN rail (E).
- Page 13 C Bare wire at tip: 9 mm Installing the main monitor/ D Wiring from doorphone or other device extension monitor VL-SV72AZ and VL-MV72AZ models: Connect the DC cable and wires. Attach the mounting bracket (A) to the wall R Connect the wires correctly according to securely.
- Page 14 Important: Do not connect the power cable. (Damage may occur.) Mount the main monitor/extension monitor to the mounting bracket. 3-1 Line up the tab on the bottom of the bracket with the groove on the main monitor/ extension monitor. 3-2 Line up the tab on the top of the bracket with the groove on the main monitor/extension monitor, and push the main monitor/extension monitor down until it is secure.
- Page 15 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8501, Japan http://www.panasonic.com © Panasonic Corporation 2017 PNQX8541ZA C0517MM0...