Download Print this page

Philips AX 2201 User Manual page 7

Philips personal cd player user manual
Hide thumbs Also See for AX 2201:

Advertisement

GENERAL INFORMATION / CD PLAY
In-car use (connections supplied or optionally available)
Only use the
AY 3545 (4822 219 10033) or AY 3548 (3140 118 71890) car voltage
converter (4.5 V DC, positive pole to the centre pin) and the AY 3501
cassette. Any other product may damage the set.
1
Put the set on a horizontal, vibration-free and
stable surface. Make sure it is in a safe place,
where the set is neither a danger nor an
obstacle to the driver and the passengers.
2
Plug the voltage converter into the
cigarette lighter socket (only for 12 V car
battery, negative grounding), then connect
the wired end with 4.5V DC input socket on the
set.
3
If necessary, clean the cigarette lighter socket
to obtain a good electrical contact.
4
Turn down the volume and connect the cassette adapter plug to LINE OUT/p
on the set.
5
Carefully insert the cassette adapter into the car radio's cassette compartment.
6
Make sure the cord does not hinder your driving.
7
Decease the volume on the set, if necessary. Start playback on the set and
adjust the sound with the car radio controls.
• Always remove the voltage converter from the cigarette lighter socket
when the set is not in use.
Note: If your car radio has a LINE IN socket , it is better to use it for the
car radio connection instead of the cassette adapter. Connect the signal
lead to this LINE IN socket and to LINE OUT/p on the set.
Playback information
• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded
properly, nF dISC is displayed, indicating that the CD has not been
car adapter
finalized. In that case, use FINALIZE on your CD recorder to complete the
recording.
• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15
seconds after pressing 2; for sound reproduction to start.
12 V DC
• Playback will stop if you open the CD lid.
• While the CD is read, 01 --:-- flashes in the display.
4,5 V DC
Volume and bass
Volume adjustment
• Adjust the volume by using VOL E.
Bass adjustment
• Press
DBB to
off
yDBB
appears if the bass enhancement is
activated.
CD PLAY / FEATURES
switch the bass enhancement on or
D B B

Advertisement

loading