Advertisement
Table of Contents
- 1 Table of Contents
- 2 General Warnings and Rules
- 3 Hazard Signal Word Definitions
- 4 Controls and Features Identification
- 5 Component Parts
- 6 Assembly Instructions
- 7 Operation Instructions
- 8 Maintenance and Storage
- 9 Troubleshooting
- 10 Specification
- 11 Parts Drawing & Parts List
- 12 Limited Warranty
- Download this manual
Advertisement
Table of Contents
Related Manuals for Brute YTL-015-691
Summary of Contents for Brute YTL-015-691
- Page 1 YTL-015-691 22 Ton Log Splitter Brute is a trademark of Briggs & Stratton Power Products Group, LLC and is used under license. Instruction & Assembly SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE REV061316...
-
Page 2: Table Of Contents
Table of Contents General Warnings and Rules………………………………………………...3 Hazard Signal Word Definitions……………………………………………...4 Controls and Features Identification………………………………………...5 Component Parts……………………………………………………………...6 Assembly Instructions………………………………………………………...7 Operation Instructions……………………………………………………….12 Maintenance and Storage…………………………………………………..15 Troubleshooting…………………………………………………………..16 Specification………………………………………………………………….17 Parts Drawing & Parts List…………………………………………………..18 Limited Warranty……………………………………………………………..21 - 2 -... -
Page 3: General Warnings And Rules
GENERAL WARNINGS READ and UNDERSTAND this manual completely before using 22 Ton Log Splitter. Operator must read and understand all safety and warning information, operating instructions, maintenance and storage instructions before operating this equipment. Failure to properly operate and maintain the log splitter could result in serious injury to the operator or bystanders. Operation Warnings ... -
Page 4: Hazard Signal Word Definitions
Hazard Signal Word Definitions This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER indicates an imminently hazardous DANGER situation which, if not avoided, will result in death or serious injury. -
Page 5: Controls And Features Identification
Controls and Features Identification Read this owner’s manual before operating the equipment. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference. 1) 7” Wedge- Features wedge wings and tapered ends making splitting easier. 2) Beam–8.5”... -
Page 6: Component Parts
WARNING Read and follow all instructions for assembly and operation. Failure to properly assemble this equipment could result in serious injury to the user or bystanders, or cause equipment damage . Engine Shipped Without Oil. Before starting engine, fill with SAE 10W-30 motor oil. See engine manual for engine oil capacity. -
Page 7: Assembly Instructions
Assembly Instructions STEP 1: Wheel Assembly 1. Attach the wheels (#4) to the oil tank axle secure using flat washer Ø20 (#6), thin hex slotted nut M20 (#8) and cotter pin Ø4x36 (#5). Place plastic cover which in the blue bag on the axle cap then install the axle cap (#7) on the end using rubber hammer. - Page 8 STEP 3: Attach Tow Bar to the Oil Tank 1. Attach the tow bar to the oil tank and secure using hex bolt M12x35 (#35), flat washer Ø12 (#20) and lock nut M12 (#25). STEP 4: Attach Cylinder 1. Remove the cylinder cover, then attach cylinder to the beam, and connect the wedge assembly, using hex bolt M12X65 (#24) and lock nut M12 (#25).
- Page 9 STEP 5: Attach the Beam Assembly 1. Attach the beam assembly (#3) to the tow bar and secure using hinge pin (#50) and R pin (#71). STEP 6: Attach Engine to the Mounting Plate 1. Place the four polyurethane blocks (#12) and large flat washer Ø10 (#58) between the mounting plate and engine.
- Page 10 STEP7: Attach the Hydraulic Hose 1. Attach the hydraulic hose(#39) to the oil outlet connector of gear pump, put in O ring Ø11.2x2.4 (#32) 2. Attach hydraulic hose (#42) to connector of the outer oil filter, put in O ringØ17x2.5 (#33). ·...
- Page 11 DANGER Log splitter engine exhaust contains carbon monoxide, a colorless, odorless, poison gas. Breathing carbon monoxide will cause nausea, dizziness, fainting or death. If you start to feel dizzy or weak, get to fresh air immediately. Operate log splitter outdoors only in a well ventilated area. DO NOT operate the log splitter inside any building, enclosure or compartment.
-
Page 12: Operation Instructions
Operation Instructions WARNING Before operating or using the log splitter, review the instructions below and all safety information. Failure to follow these instructions may result in property damage or injury to the operator or bystanders. WARNING ALWAYS use the log splitter for its intended use. ONLY use the log splitter to split wood logs, length wise with the grain. - Page 13 6. The log splitter must have at least seven feet of clearance from combustible material. It needs to be on a dry and level surface with good footing. Do not work on mud, ice, brush or snow. When using the log splitter the work zone must be maintained at all times. NOTE: Serious accidents can happen when other people are allowed inside the work zone.
- Page 14 11. Load a log onto the beam against the endplate (Max Log Length-24”) 12. Make sure hands are clear from the wedge and crush hazard areas. CRUSH WARNING Wedge can cut through skin and break bones. Keep both hands away from wedge and beam slide. Serious accidents can happen when other people are allowed inside the work zone.
-
Page 15: Maintenance And Storage
Maintenance and Storage CAUTION Improper maintenance and storage of the log splitter may void your warranty. MAINTENANCE Before performing maintenance, the log splitter must be placed in maintenance mode. Turn off the engine and move the control lever forward and backwards to relieve the hydraulic pressure. -
Page 16: Troubleshooting
Troubleshooting Problem Cylinder rod will not move SOLUTION: A,D,E,H,J Slow cylinder rod speed when extending or SOLUTION: A,B,C,H,I,K,L retracting Wood will not split or splits extremely slowly SOLUTION: A,B,C,F,I,K Engine bogs down during splitting SOLUTION: G,L Engine stalls under low load condition SOLUTION: D,E,L,M Cause Solution... -
Page 17: Specification
Specifications Ram Force……………………………………………………………….22 Ton Cycle Time………………………………………………………………13 Sec Wedge Size…………………………………………………..7” Harden Steel Gear Pump……………………………………………………………..2-Stage Hydraulic Oil……………………….AW32, AW46 & Universal Hydraulic Oil Amount of Hydraulic Fluid…………………………………………..6.5Gallon Max. Log Length…………………………………………………………….24” Hydraulic Cylinder……………………………………………………..4” x 23” Max. Pressure………………………………………………………..3600 PSI Max. Flow……………………………………………………………..11GPM Wheel Size………………………………………………………..16” / 4.80-8 Hitch Type……………………………………………………...2”... -
Page 18: Parts Drawing & Parts List
Parts Drawing & Parts List - 18 -... - Page 19 Parts Drawing & Parts List Drawing No. Ref# Description LSM22A-02000 Oil Tank LSM22A-05000 Tow Bar B LSM22A-01000 Beam LSP25-14000 Wheel 9404-04036-DX Cotter Pin Ø4x36 9301-20000-DX Flat Washer Ø20 LSP25-00009-DX Axle Cap LSP25-00020-FH Hex Slotted Thin Nut M20 LSM22A-00001 Cylinder Cover LSM22A-04000 Wedge Slide LSP25-10001...
- Page 20 Drawing No. Ref# Description LSP25-09000 Outer Oil Filter LSP25-00007-DX Connector LSP25-00017 Hydraulic Hose(valve-external filter) LSP25-00018 Oil Pipe LSP25-00011 Clamp 9101-12090-DX Hex Bolt M12x90 9101-12080-DX Hex Bolt M12x80 LSP25-00015-DX Thick Washer LSP25-11000-DX Chain Z103 2” Coupler LSP25-05000-DX Hinge Pin LSM30-00007 Control Valve Cover LSM22-04000 Cylinder LSP25-00010...
-
Page 21: Limited Warranty
Fax: (562) 404-8013 Email: parts@ytlinternational.com Website: www.brutepower.com Contact Information below for Warranty and Service Brute Log Splitter Parts and Service: Toll Free (800) 232-7162 Brute Engine and Briggs & Stratton Parts & Service: Toll Free (888) 879-3430 - 21 -...
Need help?
Do you have a question about the YTL-015-691 and is the answer not in the manual?
Questions and answers