Table of Contents
Advertisement
Installation 101/102F
The larger models have two sponges for additional
filtration but still in most cases these models should
only be used as a secondary filter to help with existing
filtration or as extra water flow in the aquarium.
They are fully assembled and ready to use.
1. Decide on which outlet option to use.
a) If no attachment is required simply push the direct
outlet or reducer into pump outlet.
b) If the venturi is required, push venturi outlet
directly into pump outlet, hang airline outside of your
aquarium.
c) If the duckbill is to be used, push duckbill outlet
directly into pump.
Fig 1
Fig 2
2. Suction cups will fasten the filter to the wall of you
aquarium. It is best to have surface agitation if it is
being used as the sole filter.
5
GB
Fig 3
Fig 4
Fig 5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 101F and is the answer not in the manual?
Questions and answers
Placement of filter in tank
The Aqua One 101F filter must be set up within the indicated arrows. It must be fully submerged in water and should not be in contact with any substrate at the bottom of the tank.
This answer is automatically generated