Assembly Instructions - KOOL-STOP KOOL STRIDE KS-S Owner's Manual And Assembly Instructions

Assembly Instructions

Remove from carton and set wheels aside.
!
Lay stroller on a flat surface, as shown in FIG. 1.
!
Lift handlebar hinge
!
Rotate upright tubes , as shown in FIG. 3.
!
Insert eye ends
D
!
Insert snapper pins
!
Rotate handlebar H upward to position shown in FIG. 4.
!
Insert ball pins
J
!
IMPORTANT : Pull strap
!
the hinge A and ball pin .
(Fabric not shown for clarity)
and rotate tube , as shown in FIG. 2.
A
C
into slots in bottom of hinges , as shown in FIG. 2 & 3.
into holes and secure with wire loop, as shown in FIG. 5 & 6.
F G
into holes as shown in FIG. 5 & 6.
K
L through cam lever
J
B
E
M and lock down so that seat fabric covers the top of
FABRIC
COVER
FABRIC
COVER