Cleaning And Maintenance; Specifications; Hints & Tips - HELLER CWH521NS Instruction Manual

2000w ceramic wall heater with led display
Table of Contents

Advertisement

Cleaning & Maintenance
1. Wait for the machine to completely cool down before commencing and cleaning.
2. Always disconnect the appliance from the main power outlet before cleaning.
3. Clean the outside surface of the heater with a damp lint free cloth. Never immerse directly in water!
4. Do not use any detergents/solvents or harsh chemical agents/abrasives to clean the heater
5. Ensure the unit is completely dry and nothing is blocking the air inlet/outlet before powering on.

Specifications

Model
Description
CWH521NS
2000W Ceramic Wall heater with LED Display
Hints & Tips
1. Do not overheat your home, in winter the temperature of a heated room should be between 18-
21°C
2. Choose the right size heater for the room that you wish to heat.
3. Zone off the unoccupied rooms by closing doors and curtains to limit heat loss.
4. Use draft stoppers where possible, to keep the cold air from filtering in under doors.
5. Avoid placing items or sitting too close to the heater for optimal air flow.
Australian Customer Service
GAF Control (Sales) Pty Ltd
P.O Box 19
Altona North Victoria 3025
Phone: 1300 659 489
Hours: 9am-5pm (EST) Mon-Fri
www.gafcontrol.com.au
*This product may vary slightly to the product illustrated due to ongoing product development.
Voltage
Frequency
220-240V~
50Hz
Wattage
2000W

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CWH521NS and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents