Description - Craftsman 172.439831 Operator's Manual

DESCRIPTION

KNOW YOUR CHAIN SAW
NOTE: Before attempting to use this product, familiarize yourself with all
operating features and safety rules.
Your Chain Saw has a precision built electric motor and it should only be connected to a
120-volt, 60 Hz AC ONLY power supply (normal household current). The electric Pole Saw/
Chain Saw should always be used with a GFCI (Ground Fault Circuit Interrupter) outlet.
DO NOT operate this Pole Saw/Chain Saw on direct current (DC). The large voltage drop
would cause a loss of power and the motor would overheat.
If the Chain Saw does not operate when plugged into correct 120-volt, 60 Hz AC ONLY outlet,
check the power supply. The Chain Saw comes with an electric plug and should be plugged
into a proper extension cord.
POLE SAW/CHAIN SAW FEATURES: TECHNICAL DATA:
• Power: 9 Amp motor
• Voltage: 120V/60Hz
• Bar length: 10"
• Rated power: 9 Amp
• Automatic lubrication system
• Bar length: 10"
• Tool-less chain tension
• Oil tank capacity: 120ml
• Tool-less blade change
• Chain Speed: 8.5 m/s
• Oil tank with visible gauge
• Chain pitch: 3/8"
• Front bumper
• Number of chain links: 40
• Weight 9.93 LBS
• Chain gauge: 0.05"
(when filled with oil)
• Saw chain type: E&S
• Pole (with extension)
®
• Bar type: E&S , ES100SDEA041
Oregon
• SAW: Weight (chain & bar included): 9.7 lbs
• Protection class:
POLE SAW/CHAIN SAW CALL- OUTS (See Figures 1 and 2 on page 15)
SAW List
1. Rear Handle
12. Chain Cover
2. On/Off Switch
13. Extension Cord Holder
3. Lock-Off Button
14. Rear Hand Guard
4. Oil Level Window 15. Drive Sprocket
5. Oil Filler Cap 16. Chain Direction Symbol
6. Front Handle 17. Oil Outlet
7. Hand Guard
18. Bar Clamp
8. Bumper Spike
19. Fastening Bar Bolt
9. Guide Bar
20. Bar Locating Tabs
10. Chain 21. Bar And Chain Storage/Transportation Cover
11. Chain Tensioning Knob 22. Bar Tensioning Plate
POLE List
23. Extension pole handle 27. Handle bracket
24. Locking collar 28. Knob
25. Receptacle cord
29. Clamping lever
26. Inner pole
14
DESCRIPTION cont.
CHAIN SAW CALL- OUTS cont. (Figures 1 and 2)
Fig 1.
1
1 4
1 3
®
, ES 91VS40E
®
Oregon , 40 pitches (91PX040X)
®
, 10" (100SDEA041)
/ II
Fig 2.
23
KNOW YOUR CHAIN SAW cont.
2 5 6 7
4
8
9
1 2
11
15 16
10
17
18
20 19 21
24
25
15
3
Chain Rotation
22
26 27 28 29