Verizon V100 User Manual page 10

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / starting.fm / 12.3.08
Attaching the belt clip
There are notches for attaching the belt
clip on the side of the handset at the same
height as the display.
¤
Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage with the notches.
Placing the handset in the base station
¤
Place the handset in the base station
with the handset's display facing out-
wards.
Charging the batteries for the first time
¤
To charge the batteries, leave the hand-
set in the base station or charging cra-
dle continuously for ten hours.
The alternately flashing battery icons =
U
at the upper right of the display screen
indicate that the batteries are being
charged.
Note:
– If the handset has turned itself off because
its batteries are empty, and you then place
the handset into the base station, it will
turn on automatically.
– Only place the handset into the base sta-
tion or charging cradle specifically
intended for it.
– During handset operation, the battery icon
e
indicates the charge status of the bat-
teries (page 1).
– The batteries may feel warm as they are
charging. This is not dangerous.
For questions and troubleshooting, see
page 27.
Setting the date and time
You should set the date and time, for
example, to ensure the correct time of
incoming calls is recorded.
To change the time and date, open the
input field using:
¢ ¢
s
Settings
§Menu§
¢
Set Date/Time
¢
Date/Time
~
Enter the time and date with
10 digits, for example, Q
M 1 5Q11
5QN for January 15,
2008, 07:15 am. If the 12-
hour time format is set, use
the * key to switch between
am and pm.
Press the display key to save
§OK§
changes.
You can change the date and time format:
¢ ¢
s
Settings
§Menu§
¢
Set Format
¤
Choose between day/month and
month/day date formats:
¢ ¢
s
Date Format DD/MM/MM/DD
¤
Choose between 12- and 24-hour time
formats:
¢ ¢
s
Time Format 12 Hours/24 Hours
Area codes
To make a call using the incoming calls list
(page 14), your phone's area code must
be stored.
¢ ¢
s
Settings
§Menu§
Code
~
Enter your area code and press
.
§OK§
Display in idle status
Once the phone is registered and the time
set, the idle display looks as shown here
(example). If the answer machine is acti-
vated, the header will also display the ans-
Õ
wer machine symbol
Ä Õ
INT 1
01/31
Your phone is now ready to use.
First Steps
¢
Date/Time
¢ ¢
System Area
.
e
9:45AM
§§§§Menu§§§§
9