Contents 1 Safety Important Safety Instructions 2 Your Docking Speaker Introduction What's in the box 3 Get started Connect power Set the clock 4 Use your iPod/iPhone Compatible iPod/iPhone Listen to an iPod/iPhone playlist Charge the iPod/iPhone 5 Play from an external device 6 Adjust volume 7 Adjust brightness 8 Product information...
1 Safety Warning • Never remove the casing of this apparatus. • Never lubricate any part of this apparatus. • Never place this apparatus on other electrical equipment. • Keep this apparatus away from direct sunlight, naked Important Safety Instructions flames or heat.
Always follow the instructions in this chapter in sequence. Congratulations on your purchase, and welcome to Philips! To fully benefit from the Connect power support that Philips offers, register your product at www.philips.com/welcome. If you contact the Consumer Care, you will be Caution asked for the model number and serial number •...
• 12H: 12-hour time format » The hour digits begin to blink. Press - VOL/VOL +to set the hour, and An application Philips ClockStudio is available then press BRIGHTNESS. on Apple App Store for this product. To enjoy » The minute digits begin to blink.
5 Play from an Play a track on your iPod/iPhone. » Music comes out through the docking external device speaker. Charge the iPod/iPhone You can also listen to an external audio player through this product. When this product is connected to power, the docked iPod/iPhone begins to charge.
6 Adjust volume 7 Adjust brightness During play, press - VOL/VOL + to decrease or increase the volume. Press BRIGHTNESS to adjust the display brightness.
If you encounter problems when using this product, check the following points before requesting service. If the problem remains General information unsolved, go to the Philips Web page (www.philips.com/support). When you contact the Consumer Care, make sure that the AC power adaptor...