Contents 1 Important 7 Product specifications Safety Care for your product 8 Trouble shooting Care of the environment Compliance Help and support 2 Your product Main unit Remote control Connectors Wireless subwoofer 3 Connect Placement Pair up with the subwoofer Connect audio from TV Connect audio from other devices 10 Connect digital devices through...
1 Important • When you disconnect the power cord, always pull the plug, never the cable. • Use the product in tropical and/or Read and understand all instructions moderate climates. before you use your product. If Risk of short circuit or fire! damage is caused by failure to follow •...
curtains or other objects never cover the ventilation slots on the product. AC voltage Risk of contamination! • Do not mix batteries (old and new or carbon and alkaine, etc.). • Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.
Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. You can find the Declaration of Conformity on www.p4c.philips.com. Help and support For extensive online support, visit www.philips.com/support to: •...
NFC tag Tap the NFC-enabled device on the tag for Bluetooth connection. Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers(e.g. Remote control notification of product software upgrade), register your product at www.philips.com/welcome.
b Source buttons i AUDIO SYNC +/- • HDMI ARC: Switch your source Increase or decrease audio delay. to HDMI ARC connection. j NIGHT • HDMI 1: Switch your source to Turn night mode on or off. the HDMI IN 1 connection. •...
d DC IN • During wireless pairing between Connect to the power supply. the subwoofer and the main unit, the indicator blinks white e AUDIO IN quickly. Connect to an audio output on a • When the pairing succeeds, the device via AUDIO IN or AUX source indicator lights up white.
3 Connect Pair up with the subwoofer This section helps you connect this The wireless subwoofer automatically product to a TV and other devices. pairs up with the main unit for wireless For information about the basic connection when you turn on the main connections of this product and unit and the subwoofer.
• For HDMI-CEC issues on your Connect audio from TV TV, see the TV user manual to make sure that the HDMI-CEC Connect this product to a TV. You setup is correct, or contact the can listen to audio from TV programs TV manufacturer if needed.
Press repeatedly AUDIO IN on Option 3: Connect to TV the remote control until AUX is through coaxial cable displayed on the display panel. Best quality audio Connect audio from other devices You may also play audio from other devices through the speakers of this product.
• The analog audio output on the Option 2: Connect to other external device might be labeled device through coaxial cable AUDIO OUT. Best quality audio Press repeatedly AUDIO IN on the remote control until AUX is displayed on the display panel. Connect digital devices through HDMI Connect a digital device such as a set-...
4 Use your » If you select “ECO” , in standby, the clock is displayed for product 1 minute then the display is switched off. » If you select “CLOCK”, in standby, the clock is always This section helps you use this product displayed.
• On your Blu-ray disc player, enable Dolby Atmos® bitstream/raw audio format for HDMI sound output. In addition to horizontal distribution • A high speed HDMI cable. of 5-channel audio, this product also From your TV: has built-in Dolby Atmos enabled •...
Press to turn auto Sound mode volume on or off. » When auto volume is turned on, Select predefined sound modes to suit your video or music. scrolls once • Press to create a surround on the display panel. listening experience. Ideal for »...
Connect Bluetooth via panel, blinking. On the Bluetooth device, switch on Bluetooth, search for and select Fidelio B8 to start connection NFC (Near Field Communication) is a (see the user manual of the technology that enables short-range Bluetooth device on how to enable wireless communication between Bluetooth).
• During USB play, press USB to MP3 player select one of the following play modes. Connect your MP3 player to play your • ALL RPT: repeat all the tracks audio files or music. in one folder. • OFF RPT: repeat mode is What you need turned off.
USB flash drive when the software update is in progress because you might damage this product. Check the latest software version on www.philips.com/support. • Search for your model and click on "Software and drivers". Download the software into a USB flash drive.
6 Wall mount Switch this product to HDMI ARC source (press HDMI ARC). On the remote control, within 6 seconds press twice then Note Volume + once, and then hold down MOVIE. • Before wall mounting, make sure the wall »...
7 Product Main unit specifications • Power supply: • Model (Philips branded AC power adapter): DYS902-190473W • Input: 100-240 V~, 50/60 Hz 1.5 A • Output: 19V , 4.73A • Standby without clock display: Note ≤ 0.5 W • Standby with clock display: ≤ 1 W •...
If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on this product do not work. •...
Page 23
• Quality of audio play from a connected Make sure that this product is not muted. Bluetooth device is poor. • The Bluetooth reception is poor. No sound from the wireless subwoofer. Move the device closer to this • Wirelessly connect the subwoofer product, or remove any obstacle to the main unit.
Page 24
The N Mark is a trademark or registered Manufactured under license from Dolby trademark of NFC Forum, Inc. in the Laboratories. Dolby, Dolby Atmos, and United States and in other countries. the double-D symbol are trademarks of Dolby Laboratories. Qualcomm aptX is a product of Qualcomm Technologies International, For DTS patents, see http://patents.dts.