Page 1
DATECS USER'S MANUAL Mobile Bluetooth Scaner DBS-55...
Page 2
All rights reserved. Any mechanical, electrical or electronic reproduction or adaptation of the information in this document without prior written permission from DATECS Ltd. is prohibited 1784 Sofia, Bulgaria, 115A Tzarigradsko shosse blvd. Tel.: +359 2/8165 500, 8165 501, 8165 506, 8165 511; Fax: +359 2/8165 510 Е-mail: sales@datecs.bg...
C O N T E N T S DATECS DBS-55 Introduction Main features..........................4 1. Technical Specifications ....................5 2. Safety Instructions .......................6 3. Confirmation of Carton Contents ...................7 6. Quick start ..........................8 7. Charging the battery ......................9 7.Pairing .............................10...
DATECS DBS-55 Main Features DATECS BlueScan DBS-55 is the first miniature Bluetooth laser barcode scanner produced by DATECS. It is one of the smallest and lightest mobile laser scanners in the world. Features: Modes of Operation • Active Bluetooth - disconnected / connected •...
● Do not handle, disassemble or repair the parts other than those specified in this manual. ● DATECS is not liable for any damage caused by user's erroneous use of the scanner and inadequate environment.
When unpacking the printer, check carefully that the following accessories are included in the carton: Item Part Name DATECS BlueScan DBS-55 USB cable (option) User's Manual Because of the continually evolving Drivers & SDK to support new mobile devices, Drivers & SDK are distributed online andis available for download at our website indicated below: http://datecs.bg/support.php?cat=4&soft=1#1...
Software is not Barcode Scanning provided by Datecs Please contact your DBS- Install Software. require software to be 55 reseller installed onto your Smartphone. Established communication Pairing Pair DBS-55 with between your your Smartphone Smartphone and Page 12. DBS-55...
DATECS DBS-55 Charging the DBS-55: The DBS-55 uses a Li-Po battery rechargeable battery pack. Before first use, the battery pack should be charged for at least (2) hours. To prevent electrical damage to the DBS-55 and/or battery pack, please use approved USB to Micro USB cables only.
You will head two beep sounds. Release the button. Now the scanner is in pairing mode and can be browsed from the PDA, smart phone or a PC. The device appears with DBS-55 in the bluethoot device list. When you find it, double click on it and click “pair”( Secure Simple Pairing). (For DBS-55 with BT3.0+HS) The device appears with DBS-55 in the bluethoot device list.
Need help?
Do you have a question about the DBS-55 and is the answer not in the manual?
Questions and answers