Table of Contents
Advertisement
Hardware and Mounting Accessories
The AP-7562 is a Power over Ethernet (PoE) device. When deployed, the use of an outdoor
rated PoE power supply and mounting bracket may be required. The recommended PoE
accessories are listed in the following table:
Part Number
AP-PSBIAS-7161-US
AP-PSBIAS-7161-WW
KT-153143-01
Mounting Accessories
The AP-7562 has a flexible three piece mounting kit (KT-147407-01), together with an
optional standoff extension arm (KT-150173-01) for pole mounting. Additionally, the KT-
147407-02 stainless steel hardware mounting bracket kit is available for deployments in
corrosive environments.
Part Number
KT-147407-01
KT-150173-01
KT-147407-02
Weatherized Ethernet Accessories
One RJ45 weatherized connector plug is included with each AP-7562 Access Point (except
M12 connector models). If additional plugs are required, they can be ordered using the
following part number:
Part Number
KT-153676-01
CAUTION
When connecting RJ45 cables, ensure cables are connected to the Access Point
from the bottom, and include a drip loop to prevent moisture intrusion. Cover
the Ethernet cable with self-healing weatherproofing tape.
Refer to the installation instructions included with the RJ45 weatherized connector plug for
proper procedure to form a drip loop with the cable.
M12 Console Port Connections
AP-7562 Installation Guide
Description
Outdoor IP66 802.3AT gigabit Ethernet power injector,
100-240 VAC US
Outdoor IP66 802.3AT gigabit Ethernet power injector,
100-240 VAC International
Outdoor PoE mounting kit
Description
Hardware mounting kit
12 inch extension arm for mounting kit
Stainless steel hardware mounting kit
Description
RJ45 weatherized connector plug
Introduction
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AP-7562 and is the answer not in the manual?
Questions and answers