How To Create A Snapshot With The Ilom Command-Line Interface - Oracle SUN Fire X4640 Diagnostics Manual

Click Run.
7
A Save As dialog box appears.
In the dialog box, specify the directory to which to save the file and the file name.
8
Click OK.
9
The file is saved to the specified directory.
▼
How To Create a Snapshot With the ILOM
Command-Line Interface
Caution –
To collect SP data using the Service Snapshot utility, you need the Admin (a) role enabled.
Before You Begin
Log in to the ILOM CLI.
1
Type the following commands:
2
->set /SP/diag/snapshot dataset=data
->set /SP/diag/snapshot dump_uri=URI
Where data and URI are one of the following:
Value
data
Customers should not run this utility unless requested to do so by Sun Services.
Option Header
normal Specifies that ILOM, operating system, and
hardware information is collected.
full Specifies that all data is collected ("full"
collection).
Note: Using this option might reset the running
host.
normal-logonly Specifies that only log files are to be collected.
or
full-logonly
Creating a Data Collector Snapshot
39