Do you have a question about the FSV1101 and is the answer not in the manual?
Questions and answers
Summary of Contents for Fat Shark FSV1101
Page 1
Fat Shark RC Vision Systems TRANSFORMER USER MANUAL FSV1101 Transformer 720p display FSV1102 Transformer Binocular Viewer FSV1103 Transformer Full Panel Viewer Revision B 10/27/2016 For more product information, please visit: www.fatshark.com All Rights Reserved...
Fat Shark RC Vision Systems Product Contents FSV1103 Transformer Full Panel Viewer Full Panel Viewer x 1pc Battery extension cable x 1pc Lens cleaning cloth x 1pc Cap x 1pc...
Fat Shark RC Vision Systems Controls Diagram FSV1101 Transformer 720p display For circular polarized For patch antenna (omni directional) (recommended) Antenna(recommended) Short Press to change display mode Long press down rotates the image 180 degree 5 way joystick Channel Selection...
Fat Shark RC Vision Systems Controls Diagram FSV1102 Transformer Binocular Viewer Screen distance adjust knob Screen holder clip IPD Adjusters SUN WARNING! DUE TO 3.6X OPTICS, LCD DAMAGE IS POSSIBLE IF LENS EXPOSED TO BRIGHT LIGHT.THIS WILL NOT BE COVERED BY WARRANTY.
Fat Shark RC Vision Systems Controls Diagram FSV1103 Transformer Full Panel Viewer Screen holder clip Bottom panel Open the bottom panel, you can change your lens.
Fat Shark RC Vision Systems Assembly instructions Transformer 720p display + Binocular Viewer Transformer 720p display + Full Panel Viewer Step1: Take off the cap Step2: Clip the cap Step3: Place the display as shown below, antenna connector in the front...
Fat Shark RC Vision Systems Features 5.5” LCD screen with 1280*720p resolution FOV 47 degrees (full panel viewer) / 55 degrees (binocular viewer) Support 16:9 and 4:3 analog display Support side by side image for binocular viewing (analog only) ...
SMA. 18650 Battery Holder (batteries not included): The Fat Shark 18650 Battery Holder is compatible with commonly available 18650 style Li-Ion packs to provide a huge capacity power supply. The holder has a row of stylish blue LED indicators to indicate remaining capacity (4 levels) to prevent a sudden power/vision lost.
Page 12
Fat Shark RC Vision Systems Ports 1 x Audio out (volume adjustable by earphone, 3 pole 3.5mm connector) 1 x DC in (5mm DC barrel) SMA RF in (2) 1 x AV IN 1 x AV OUT ...
Fat Shark RC Vision Systems Trouble Shooting Observation Possible Cause/Solution No image, display is - No power supplied. Check power completely dark connections. - If using wireless module, switch to Rx display mode No image, display is glowing - If using AV in cable, check video source.
Need help?
Do you have a question about the FSV1101 and is the answer not in the manual?
Questions and answers