Wi-Fi Network - AT&T Smart Sync 5 User Manual

Wi-Fi Network

In the event that you change your home Wi-Fi password or
network, you must update this information in your monitor and
restore the link between your monitor and camera.
Update Password for Current Network
To update the Wi-Fi password, select your home network and
enter the updated password. If connection is successful, the Wi-
Fi signal bars on the Status Bar will show.
Changing to New Wi-Fi Network
Simply tap on the new network that you wish to join. If connection is successful, the Wi-Fi signal bars on the Status Bar will
show.
Relinking the Camera and Monitor
After you have successfully updated your home Wi-Fi network, the next step is to re-link the camera and monitor. Simply
follow these steps:
1. Reset the camera to enable pairing mode, follow the steps under the Resetting the Camera section.
2. Delete the camera from your Smart Link Monitor by following the steps under the Deleting a Camera
section.
3. Pair the camera to your monitor by following the steps under the Pairing a Camera section.
Settings: Wi-Fi
24