Fm Radio; Tuning To Radio Stations; Programming Radio Stations; Tuning To Preset Radio Stations - Philips DCB146 User Manual

Tuning to radio stations

1
Press SOURCE (or TUNER/DAB on the
remote control ) repeatedly until the desired
waveband (FM) is displayed.
2
Press briefly SCAN.
➜
The radio automatically tunes to a station
with sufficient reception. "Searching.... " is
displayed during automatic tuning.
3
Repeat step 2 if necessary until you find the
desired station.
● To tune to a weak station, press TUNING 4
¢ (or 4 ¢ on the remote control)
briefly and repeatedly until you have found
optimal reception.

Programming radio stations

You can store up to a total of 30 radio stations
in the memory.
Automatic programming
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be erased.
●
Press and hold SCAN for more than two
seconds to activate programming.
➜
"FM Scanning... " is displayed during searching
and storing.
➜
All available stations are programmed.
Manual programming
1
Tune to your desired station (see Tuning to radio
stations).
2
Press briefly PROG on the remote control to
activate programming.
3
Press PRESET + + + + /- + - - - - (or 3 / 4 on the
remote control ) to allocate a number from 1 to
30 to this station.
4
Press and hold PROG to confirm the setting.
➜
The preset number and the frequency of the
preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

●
+ + - -
Press PRESET + + + /- - (or 3 / 4 on the -
remote control ) until the desired preset station
is displayed.

FM Radio

17