Zte ZXV10 W300 Quick Installation Manual
Wireless adsl/lan router
Hide thumbs
Also See for ZXV10 W300:
- Maintenance manual (89 pages) ,
- User manual (43 pages) ,
- Product description (13 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zte ZXV10 W300
Summary of Contents for Zte ZXV10 W300
- Page 1 ZXV10 W300 Wireless ADSL/LAN Router Quick Installation Manual ZTE CORPORATION...
- Page 2 No part of this documentation may be excerpted, reproduced, translated, annotated or duplicated, in any form or by any means without the prior written permission of ZTE CORPORATION. ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China Website: http://support.zte.com.cn Post code: 518057...
-
Page 3: Table Of Contents
ACTORY EFAULTS 3.3 C ....................14 OMPUTER ETUP 3.3.1 Checking Computer Settings ..............14 3.3.2 Configuring TCP/IP ...................14 4 WIZARD.........................16 4.1 L ZXV10 W300 D ............16 OGGING ON TO THE EVICE 4.2 S ATM PVC....................17 ETTING 4.3 C ....................18 ONNECTIONS 4.4 S .................19... - Page 4 4.7.4 Dynamic DNS.....................28 4.7.5 TR069......................29 5 TECHNICAL SPECIFICATIONS ...............32 5.1 H ................32 ARDWARE PECIFICATIONS 5.2 S ................33 OFTWARE PECIFICATIONS 6 QS AND AS......................35...
-
Page 5: Product Introduction
Welcome you to use the ZXV10 W300 Wireless ADSL/LAN Router. ZXV10 W300 series products are home user oriented wireless broadband router integrating ADSL, AP and LAN Switch. The ZXV10 W300 router acts as the center of a home network and lets all of the devices in a home... -
Page 6: Packing List
ZXV10 W300 Quick Installation Manual Support eight PVC connections and auto-negotiation Support PPPoE, PPPoA, Static, DHCP, Bridge and CLIP connections. Support NAT, IP filtering and firewall functions. Support network configuration using DHCP Support UPnP, SNTP, DMZ, IGMP Snooping, IGMP Proxy and DNS Proxy. -
Page 7: System Requirement
In case of replacement, please keep the package and existing components of the product well. 1.3 System Requirement Before using the ZXV10 W300 product, please ensure the following system requirements: You have subscribed the ADSL/LAN service. Your Internet... -
Page 8: Introduction To The Hardware
2 Introduction to the Hardware 2.1 Indicators There area eight indicators on the front panel of the ZXV10 W300. These indicators indicate the service running status of the ZXV10 W300. The indicates are described in the table below. Identificatio Indicators... -
Page 9: Ports And Buttons
Chapter 2 Introduction to the Hardware Identificatio Indicators Color Description failure. Steady ON: Indicates Wi-Fi is switched on. Flashing: The indicator Green WLAN flashes according to the network traffic flow. OFF; Indicates Wi-Fi is switched off. Steady ON: Indicates the device has been connected to the LAN. - Page 10 ZXV10 W300 Quick Installation Manual There are nine ports and buttons on the side of the ZXV10 W300 device. Ports and buttons are described in the table below. Port Description identification Connected to the ADSL line or splitter via RJ-11...
-
Page 11: Quick Installation
3 Quick Installation It is assumed that you have signed up for the ADSL service from the Service Provider. In addition, this chapter contains the basic product configuration only, which is applicable to the network environment of general subscribers or enterprise users. 3.1 Hardware Connections The following diagram illustrates the recommended connections and installation via ADSL connector. - Page 12 1. Installation position The ZXV10 W300 device can be placed on a plane surface like desktop, or installed on the wall. It is recommended to place the device on the center of the network to be established and keep it far away from possible interference sources, e.g.
-
Page 13: Factory Defaults
3.2 Factory Defaults Factory defaults of the ZXV10 W300 device are as follows: IP address: 192.168.1.1; Subnet mask: 255.255.255.0 Use DHCP server by default. The IP address can be obtained from the device via DHCP. -
Page 14: Computer Setup
ZXV10 W300 Quick Installation Manual and hold down the button for more than 10 seconds when the device is powered on. This will restore the current settings to the factory defaults and then the system will restart automatically. 3.3 Computer Setup 3.3.1 Checking Computer Settings... - Page 15 Internet directly when it has been connected to the office-end device successfully. To check the ZXV10 W300 device settings, visit http://192.168.1.1 via a browser and log on to the device using admin as both the username and the password.
-
Page 16: Wizard
4 Wizard You need relevant technical knowledge and experience for configuring the ZXV10 W300 device. To simplify your operations, it is recommended to use the wizard for quick configuration. A little configuration will allow you to establish the connection for basic use. -
Page 17: Setting Atm Pvc
Chapter 4 Wizard Select the language for web configuration. Enter your Username and Password (which are admin and admin by default), and then click the Login button to enter the configuration main page. 4.2 Setting ATM PVC Click the Wizard button on the main page to enter the quick configuration wizard which allows you to configure the DSL Modem quickly. -
Page 18: Connections
ZXV10 W300 Quick Installation Manual 4.3 Connections You can select one of the ADSL access modes, including PPPoE, PPPoA, Bridge, DHCP, Static Bridged, Static Routed and CLIP, and then configure data encapsulation. Please contact your service provider for the settings of connection and encapsulation. After completing the setting,... -
Page 19: Setting Configurations
Chapter 4 Wizard 4.4 Setting Configurations The configuration page you enter may be different depending on the type of connection you selected. The configuration sequences in the cases of the seven types of connections are as follows, respectively: PPPoA and PPPoE: ATM PVC Setting > Connection Type >... -
Page 20: Configuration Information
ZXV10 W300 Quick Installation Manual your service provider for the specific parameters. After completing the setting, click Next on the page. 4.5 Configuration Information The configuration information page may be different depending on the connection type you selected. You can check if the settings are correct. -
Page 21: Other Common Configurations
Chapter 4 Wizard 4.7 Other Common Configurations 4.7.1 Creating New WAN Connections If you have created a connection (e.g. Internet access) via the wizard, you can also create another WAN connection (service subscription required) for the access to the services like IPTV. Click the Basic Configuration button on the main page, and then click Create WAN Connection on the left side of the page to configure WAN connections, including Bridge, CIP, PPPoA, PPPoE, Static and DHCP. - Page 22 ZXV10 W300 Quick Installation Manual PPPoE parameter description 1. Globally unique parameters of the WAN connection Name: Specifies the name of the connection to be created Type: Specifies the type of the connection to be created Options: Enables firewall and NAT 2.
- Page 23 Chapter 4 Wizard Hold connection: This option can be configured when the Dial as needed option is not selected. It specifies the waiting time for connecting your service provider before the connection is terminated. MTU: Maximum transmission unit of the DSL connection, i.e., the maximum number of bytes of data packets transmitted using TCP/IP.
- Page 24 ZXV10 W300 Quick Installation Manual 4. PVC parameter description PVC: PVC (permanent virtual circuit) provides a permanent logical connection between two terminals within a packet network during the contract application period. PVC does not require the call setup or clear procedure.
- Page 25 Chapter 4 Wizard 1. Click the Basic Configuration button on the main page, and then click the Create WAN Connection on the left side of the page to enter the PPPoE Connection Settings page. 2. Type in the name of the PPPoE connection to be created in the Name box, e.g.
-
Page 26: Upnp
ZXV10 W300 Quick Installation Manual 4.7.2 UPnP In the case the ZXV10 W300 works in the routing mode, if the terminal user runs special applications, e.g. BitComet and BitSpirit, you must enable UPnP on the device to optimize the performance. -
Page 27: Dmz
Chapter 4 Wizard Enable UPnP: Enables/disables the UPnP function. The default is disabled. WAN connection: Selects the WAN side connection LAN connection: Selects the LAN side connection 4.7.3 DMZ When the device operates in Routing mode, if you try to access a service on a host placed in the intranet from an external network, the DMZ host function should be enabled. -
Page 28: Dynamic Dns
ZXV10 W300 Quick Installation Manual Enable DMZ: Enables/disables the DMZ function. The default is disabled. Select WAN connection: Selects the WAN connection using DMZ. Select LAN: Selects the LAN connection using DMZ Select a LAN IP address: DMZ host IP address. This host is open to the external network. -
Page 29: Tr069
Chapter 4 Wizard the ZXV10 W300 device and configure DDNS (requires service subscription from your service provider and network carrier). WAN connection: The default is the WAN connection for the ZXV10 W300. DDNS server: Specifies the DDNS server. Dynamic DNS: Enables/disables DDNS client for the WAN connection. - Page 30 ZXV10 W300 Quick Installation Manual communications between CPE and ACS. CPE WAN management protocol defines its own mechanism. It allows the automatic CPE security configuration, and additionally, incorporates other CPE management functions into a common framework. The TR069 protocol allows remote device management.
- Page 31 Default WAN connection: The default WAN connection that TR069 uses. Enable periodic Inform: Enables/disables the periodic connection from the ZXV10 W300 to the ACS. If it is enabled, you must input a value in the Inform cycle time field. Inform cycle time: Check the Enable periodic Inform check box and configure the time between a successful connection and a new connection attempt to the ACS server.
-
Page 32: Technical Specifications
5 Technical Specifications 5.1 Hardware Specifications 1. ADSL interface Compliant standards: ITU G.992.1, G.992.2, G.992.3, G.992.5 and ANSI T1.413 Issue 2. Line impedance: 100 Connection line: A pair of ordinary telephone wires Connector: RJ-11 2. WAN interface Interface: 10/100 Base-T, IEEE 802.3/802.3u Connector: RJ-45 Automatic recognition... -
Page 33: Software Specifications
Chapter 5 Technical Specifications Power adapter: 220 VAC/50Hz input, 18 VAC/500 mA output Power < 9 W 7. Security CE FCC Enviroment requirement Working temperature: -5 ºC ~ 45 ºC Storage temperature: -40 ºC ~ 70 ºC Working humidity: 5% ~ 95% Storage humidity: 10% ~ 100% 9. - Page 34 ZXV10 W300 Quick Installation Manual Transparent bridging (IEEE 802.1D) RFC 2684 Spanning-tree protocol (IEEE 802.1D) Support 2048 MAC learning addresses Support bridge filter 3. Routing Static routing Dynamic routing and policy routing NAT, ALGs Firewall DNS Proxy, IGMP Proxy UPnP DMZ 4.
-
Page 35: Qs And As
LAN indicator is OFF when Make sure the Ethernet cable is connected properly to the the Ethernet hub/Ethernet switch/computer and the ZXV10 W300 device. Make sure the hub/Ethernet switch/computer are powered on. cable is connected... - Page 36 ZXV10 W300 Quick Installation Manual Problem Troubleshooting Use the Ping command to check if the network interface IP address (preset to 192.168.1.1) of the device can be pinged from the computer. If not, check the Ethernet cable connection. Check if the indicator status is normal.
Need help?
Do you have a question about the ZXV10 W300 and is the answer not in the manual?
Questions and answers