FLAVIA Creation 400 User Manual page 13

Hide thumbs Also See for Creation 400:
Table of Contents

Advertisement

T R O U B L E S H O O T I N G
PROBLEM
REASON
No messages on display
Drinks Station has been
switched off at back
Drinks Station disconnected
at socket
"CALL OPERATOR"
"PACK DOOR TIMEOUT"
message flashes
"PACK INJECT TIMEOUT"
"PACK EJECT TIMEOUT"
"TANK FILLING TIMEOUT"
"BUTTON STUCK DOWN"
"SELECT PAYMENT
SYSTEM"
SOLUTION
Put plug back into socket and switch
on at socket
If problem recurs, please call your
Customer Service Officer.
Enter Operator Menu ref. pages 2/3,
then press 'Exit Menus' to reset.
If problem recurs, please call your
Customer Service Officer.
If your drink station is intended to be
jug filled, then change the 'Water
Supply' in 'Operator Menu' ref.
pages 2/3, if problem recurs, please
call your Customer Service Officer.
Press all selection buttons to check
movement. If problem recurs, please
call your Customer Service Officer.
The 'Free Vend' menu is set to
'Disabled', Enter 'Operator Menu' ref
pages 2/3. Press 'Edit' to enable
'Free Vend'. If problem recurs,
please call your Customer Service
Officer.
9
P R É S E N TAT I O N D U P R É PA R AT E U R D E B O I S S O N S
EXTÉRIEUR
Fente d'introduction des pièces
Bouton de rejet des
pièces
Porte de la
caisse
Ramasse-gouttes
I N S TA L L AT I O N D E V O T R E P R É PA R AT E U R D E B O I S S O N S
MISE EN MARCHE
1.
Brancher votre préparateur de boissons FLAVIA®
2.
L'allumer en appuyant sur l'interrupteur marche-arrêt situé à l'arrière
REMPLISSAGE D'EAU
MENU OPÉRATEUR
1.
Appuyer simultanément sur les boutons de sélection en bas de gauche et de droite. (Réf. A)
2.
Appuyer sur le bouton en haut à droite 4 fois (Réf. B)
3.
Menu Opérateur
(Ref. A)
Couvercle de
remplissage (non
raccordé seulement)
Panneau d'instructions
Sélection des boissons
Touches
Porte du sachet filtre
Bac de sachets
filtres /
Entonnoir à
sachets filtres
si installé sur une
armoire de base
FLAVIA®.
(Ref. B)
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Creation 400 and is the answer not in the manual?

Questions and answers

Jaime
March 31, 2025

Pack eject timeout

1 comments:
Mr. Anderson
March 31, 2025

The "PACK EJECT TIMEOUT" on the FLAVIA Creation 400 indicates a problem with the pack not ejecting properly. To resolve it, enter the Operator Menu (refer to pages 2/3 of the manual), then press ‘Exit Menus’ to reset. If the problem recurs, contact Customer Service.

This answer is automatically generated

Table of Contents

Save PDF