Page 1
LED BAR 123 FC IP Manuel d’utilisation Nouvelle technologie LED Nous vous recommandons de lire attentivement le manuel avant toute utilisation.
Page 2
installation, operation and maintenance. Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. Unpack and check carefully there is no transportation damage before using the unit. Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
Page 3
LED display for easier operation. Selectable built-in programs, Auto running, DMX mode, M/S mode and colours DMX modes: 7 / 36 channels 3. Working modes Operate with three buttons. There are two kinds of function for the first button: A/ press the “mode” above 2 seconds, until the LED display show enter next working mode, then it is enter another kind of working mode.
Page 4
DMX working mode 1:03c(3CH) CHANNEL VALUE FUNCTION 0-255 0-255 GREEN 0-255 BLUE DMX working mode 2:07c (7CH) CHANNEL VALUE FUNCTION 0-255 0-255 GREEN 0-255 BLUE 0-255 MASTER DIMMER CH1~ CH4 DIMMER juil-13 PR.01 14-20 PR.02 21-27 PR.03 28-34 PR.04 35-41 PR.05 42-48 PR.06...
Page 6
CH12 0-255 BLUE CH13 0-255 CH14 0-255 GREEN CH15 0-255 BLUE CH16 0-255 CH17 0-255 GREEN CH18 0-255 BLUE CH19 0-255 CH20 0-255 GREEN CH21 0-255 BLUE CH22 0-255 CH23 0-255 GREEN CH24 0-255 BLUE CH25 0-255 CH26 0-255 GREEN CH27 0-255 BLUE...
Page 7
3.4 Static colour mode Press the “mode” above 2 seconds, switch into 5 working modes, when it shows “COL”,it is the static color mode. Press the “mode” button, when it shows “1.-r” or “2.rg”or “3.-g”or “4.gb”or “5.-b”or “6.rb”or “7.FL”or “8.0F”. Press the “up” or “down” to choose the single color. Press the “mode”, show “F.xx”...
Need help?
Do you have a question about the LED BAR 123 FC IP and is the answer not in the manual?
Questions and answers