Nokia OZO camera Manual page 10

Power ON-OFF
To power on the device slide the power
button (A) to the outmost right position and
release. The button will stay in an intermediate
position and the indicator (LED) in the center
of the button indicates booting (by blinking
slowly).
Once the booting has finished the indicator
discontinues blinking and remains lit. The
device always boots into "Broadcasting" mode
to allow immediate preview over SDI.
For complete shutdown slide the power
button to the outmost left position.
WiFi
By default the device is enabling WiFi
immediately after booting is complete. The
WiFi-LED (B) is blinking slowly to indicate
readiness to connect.
The OZO Remote host computer must have
WiFi enabled to connect to the OZO Camera.
The WiFi-button indicator discontinues
blinking and remains lit to indicate a
successful connection to the OZO Remote
Application.
To boot the device without WiFi (airplane
mode) press and hold the WiFi button during
startup until booting has finished.