Tail Lights - Porsche 928 ST1991 Owner's Manual

Tail lights

The tail lights are housed in one unit.
A - tail lights
Β - stop light
C - t u r n signal light
D- back-up light
If a tail light or stop light fails, a fault message
appears in the information system display.
1. Remove tool tray from the rear cross wall
inside luggage compartment.
Use the spark plug spanner to unscrew
the hex nut (arrowed) which holds the tail
light unit in place and remove the unit
from the rear bumper.
3. Turn holder of defective bulb antic­
lockwise to limit stop and remove bulb-
holder.
4. Remove bulb from bulbholder and fit new
bulb. Reinstall bulbholder
clockwise to limit stop.
5. Install tail light unit in bumper and tighten
retaining nut.
Do not overtighten.
6. Check function of light.
and turn
101