APRILIA CAPONORD 1200 Service Station Manual page 303

CAPONORD 1200
Pos. Description
1 Headstock ring nut - pre-tightening
1 Headstock ring nut - tightening
2 Headstock cap
3 TCEI screw fastening fork legs to
bottom yoke
4 TCEI screw fastening U-bolt onto
fork yoke
5 TCEI screw fastening fork legs to top
yoke
6 Headstock counter-lock ring
Removing the fork legs
•
Remove the front wheel.
•
Support the stanchion and loosen the
screws on the upper and then the lower
plate.
•
Remove the stanchion.
FOR THE ADD VERSION, THE PRESSURE
SENSOR MUST BE DISCONNECTED BEFORE
REMOVING THE LEFT STEM.
•
Undo and remove the sensor fixing
screw located on the fork head.
CAUTION
TO AVOID OIL LEAKAGE FROM THE STEM WHEN RE-
MOVING THE PRESSURE SENSOR, REPLACE IT WITH A
CAP. AS AN ALTERNATIVE, DO NOT PLACE THE STEM
HORIZONTALLY.
S
TEERING
Type Quantity
M25x1 1
M25x1 1 50 +/- 5 Nm (36.88 +/-
M22x1 1 100 Nm (73.75 lb ft)
M8x35 4
M10x60 2
M8x30 2
M25x1 1
Suspensions
Torque
60 Nm (44.25 lb ft) Unscrew after pre-
tightening
3.69 lb ft)
25 Nm (18.44 lb ft)
50 Nm (36.88 lb ft)
25 Nm (18.44 lb ft)
- Manually screw
Notes
-
-
-
-
-
SUSP - 303