To select connected equipment
Press the v key on the remote control repeatedly, or select Source in the Setup menu (see p. 10) to
select
,
,
EXT1
EXT2
EXT3
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
Recorder or DVD with EasyLink
The recorder or DVD can be operated with
the remote control via the
menu on screen.
Recorder
Ò
p
Rwd Play
DVD
Ò
p
Prev. Play
Record with your recorder with EasyLink
In TV mode, it is possible to start a direct recording of the programme which is being displayed on the TV
screen. Continue to press the ® record key on the remote control for more than 2 seconds.
Note: Switching programme numbers on your TV does not disturb recording !
When recording a programme from a peripheral connected to
programme on the screen without disturbing the recording.
22
,
or
according to where you connected your equipment.
Side
DVI
or
Recorder
DVD
‡
π
†
®
Stop Play
Ffw
Rec Eject
‡
π
†
Ï
Stop Play
Next Eject
&
Press the
MENU
é
Select the
Recorder
cursor up/down.
"
Press the cursor left/right, up/down to select
one of the recorder or DVD functions.
Ï
The key ® for recording can be operated in the TV
mode.
If your EasyLink recorder has the system standby
function, when you press the B key for 3 seconds,
both TV and the recorder are switched to standby.
,
or Side, you can not select another TV
EXT1
EXT3
key on the remote control.
or
menu with the
DVD