Specifications - Kenwood VT-183 Service Manual

Meter Section
Measure voltages
dB
dBm
Error
Frequency response
Input impedance
Max. input voltage
Stability
Residual Voltage
Amplifier Section
Output Voltage
Output resistance
Frequency response
Distortion
Signal to noise ratio
DC output Amplifier Section
Output voltage
Offset voltage
Output resistance
Frequency response
Environmental
Coefficient
Temperature
Relative humidity
Power Supply Section
Line voltage
Power consumption
Dimensions
WxHxD (mm)
Net Weight
Accessories
Power cable
Input cable
Replacement fuse
Instruction manual
Adjust driver

SPECIFICATIONS

1mV to 300mV in 12 ranges :
1, 3, 10, 30, 100, 300mV, 1, 3, 10, 30, 100, 300V full scale
–80 to +52dBm (0dBm=1mW at 600Ω)
Within ±3% of full scale at 1kHz
±10% at 5Hz to 1MHz,
±3% at 20Hz to 200kHz and
±2% at 30Hz to 100kHz as
reference to 1kHz response.
10MΩ +5% with less than 50pF parallel capacitance.
500V (DC +AC peak) 1V to 300V range
100V (DC +AC peak) 1mV to 300mV range
Within 0.5% of full scale for 10% line voltage fluctuation.
Less than 20µV with input shorted on 1mV range
1Vrms (full scale) ±20%
Within
Less than 1% at full scale
(Rated by signal-noise ratio in 1mV and 1V ranges. )
1V ±20% +offset voltage at full scale
Within ±3% at 10Hz to 1MHz
Within specification : 10 to 40˚C
Full operation
100/120/220/230 Vac ±10% 50/60Hz
128 (128) x 190 (210) x 239 (268)
Value in ( ) include protrusions
–80 to +50dB (0dB=1V)
600Ω ±20% at 1kHz
±3dB at 10Hz to 500kHz
Over 40dB at full scale
±100mV
Less than 10mVrms
±0.08%/˚C
: 0 to 50˚C
Less than 80%
Max. 7.5W
3kg
1 pc.
CA-41 1pc.
1 pc.
1 copy
1 pc.
VT-183
3