Advertisement
Centrifuge
Model XC-2000
Operating Manual
Before using this product, please read this manual carefully to learn about the available
features to obtain the best results of this equipment.
Warning: To prevent fire or shock hazard, do not expose this unit to rain or moisture. Unless
labeled otherwise, this equipment should be used with AC 110V 60Hz in the USA or Canada.
220V 50Hz available as Model No. XC-2000-220
Caution: No user-serviceable parts inside. Refer servicing to qualified service personnel
Advertisement
Table of Contents
Related Manuals for premiere XC-2000
Summary of Contents for premiere XC-2000
- Page 1 Warning: To prevent fire or shock hazard, do not expose this unit to rain or moisture. Unless labeled otherwise, this equipment should be used with AC 110V 60Hz in the USA or Canada. 220V 50Hz available as Model No. XC-2000-220 Caution: No user-serviceable parts inside. Refer servicing to qualified service personnel...
-
Page 2: Table Of Contents
1.1 Table of Contents Section • Table of Contents Page 1 • Safety Page 2 • Contents/Accessories Page 3 • Specifications Page 4 • Notes of Operations Page 5 • Control Panel/Setup Page 6 • Operations Page 7 • Warranty Page 8... -
Page 3: Safety
2.1 Safety Before using the centrifuge, please read this instruction manual carefully. Incorrect or inappropriate use may result in equipment damage or personal injury! This centrifuge is designed for clinical medicine, biology, genetic engineering, immunology, etc. The density of the separated sample cannot exceed 1.2g/cm³ under the maximum speed, when the density of the sample exceeds 1.2g/cm³, the maximum speed of the rotor must be reduced accordingly. -
Page 4: Contents/Accessories
3.1 Contents Number Name Note Centrifuge 1set Rotor (included) (six included inside unit & 12pc Capacity =< 10-15mL x 6 tube holders six extra) Black silicone tube cushions Fuse 4 AMP Operating manual Upon receipt, please examine the package, if there's anything wrong, please kindly contact your dealer promptly. -
Page 5: Specifications
4.1 Specifications Function/ Parameter Technical Data • Clean, dry and flat surface • Stable work surface Environment of use • Altitude: • Relative humidity:≤80% • +5°C~-40°C Ambient Temperature • AC110V 60Hz (or 220V 50Hz-220 Model Applicable Voltage Only) • 1~60min Setting Time Range •... -
Page 6: Notes Of Operations
5.1 Notes of Operation ● Ensure the rotor is tightened before running the centrifuge. ● Do not open the lid while the rotor is spinning. Allow centrifuge to come to a complete stop before attempting to open lid and remove specimen tubes. ●... -
Page 7: Control Panel/Setup
6.1 Control Panel Control Panel Time LED： Time in min + -：increase/decrease time/rpm’s Switch: alternate display between time/speed On/Off： run/stop 6.2 Setup 1. Open box and remove centrifuge from packaging 2. Place centrifuge onto flat surface 3. Open lid and remove foam packaging inside 4. -
Page 8: Operations
7.1 Operations Time Adjustment 1. Press “Switch” to alternate to time setting. Push the “+” or “-” button to adjust the time setting. To increase the run time push the “+” button until desired time reached or maximum of 60 minutes. (See section 6.1). To decrease the run time push the “-” button until desired time reached or minimum of 1 min. -
Page 9: Warranty
If misuse, alterations, accident or abnormal conditions of operation caused failure, an estimate for repairs will be provided for your approval prior to work being performed. E2 v.2 © 2015 Premiere Service Department 7241 Gabe Court Manassas, VA 20109-2434...
Need help?
Do you have a question about the XC-2000 and is the answer not in the manual?
Questions and answers
My new centrifuge XC-2000 give always E7 error few seconds after starting