Disassembly And Reassembly; Order Of Disassembly - Hitachi DV-DS163E Service Manual

Disassembly and Reassembly

4

4-1 Order of Disassembly

Refer to the Disassembly Flowchart in Fig. 4-1-1 for the order of removing components. When
reassembling components, use the reverse order to removal unless otherwise specifi ed.
Reading Disassembly Flowchart:
After locating the target component in the fl owchart, remove all components of the target in
sequence, following the arrows (routes) from the top of fl owchart. If multiple routes exist to the
target component from the top of fl owchart, remove all the components on all the routes.
Parts to remove Item
･Top Cover 4-2 (1)
･Front Block 4-2 (2)
･TIMER-1 P.C.B
4-2 (3)
･TIMER-2 P.C.B
･Front Panel
Parts to remove Item
･Fan 4-2 (1)
･HDMI Block 4-2 (6)
･MAIN P.C.B 4-2 (4)
･Power Cable
4-2 (5)
･SMPS P.C.B
･Front Frame 4-2 (7)
4-2 (7)
･DVD Block
･HDD Block 4-2 (8)
･CARD P.C.B 4-2 (9)
Fig. 4-1-1 Disassembly Flowchart
4 - 1
Parts to remove Item
･HDMI P.C.B 4-2 (6)
･I/O P.C.B 4-2 (10)
･LOADER P.C.B
4-2 (7)
･DVD Drive Unit
･HDD P.C.B
4-2 (8)
･HDD
Parts to remove Item
･Rear Panel 4-2 (11)