MasterCraft 058-8122-6 Instruction Manual
  1. Manuals
  2. Brands
  3. MasterCraft Manuals
  4. Nail Gun
  5. 058-8122-6
  6. Instruction manual

MasterCraft 058-8122-6 Instruction Manual

Air-powered pin nailer
Hide thumbs
Table of Contents

Advertisement

Quick Links

INSTRUCTION MANUAL
AIR-POWERED
PIN NAILER
058-8122-6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 058-8122-6 and is the answer not in the manual?

Questions and answers

Related Manuals for MasterCraft 058-8122-6

Summary of Contents for MasterCraft 058-8122-6

  • Page 1 INSTRUCTION MANUAL AIR-POWERED PIN NAILER 058-8122-6...
  • Page 2 QUICK START GUIDE TECHNICAL SPECIFICATIONS SAFETY GUIDELINES 4–9 KEY PARTS DIAGRAM IMPORTANT INFORMATION 11–13 TYPES OF FASTENERS OPERATING INSTRUCTIONS 15–19 MAINTENANCE 20–21 TROUBLESHOOTING 22–24 EXPLODED VIEW PARTS LIST 26–27 WARRANTY 28–29 AIR-POWERED PIN NAILER 058-8122-6...
  • Page 4 PERSONAL SAFETY These precautions are intended for the personal safety of the user and others working with the user. Please take time to read and understand them. AIR-POWERED PIN NAILER 058-8122-6...
  • Page 5 Use a minimum of 25' (7.6 m) of hose to Explosive connect the tool to the compressor. Failure to comply will Combustible result in serious injury or loss of life. MC-OM-02 Risk of inhalation: Never directly inhale the air produced by the compressor. • AIR-POWERED PIN NAILER 058-8122-6...
  • Page 6 Drain water from tank after each use. Do not weld or repair tank. Relieve all pressure in the hose before removing or attaching accessories. MC-OM-22 AIR-POWERED PIN NAILER 058-8122-6...
  • Page 7 • Do not operate the compressor on a rooftop or in an elevated position that could allow the unit to fall or be tipped over. • Always replace a damaged gauge before operating the unit again. AIR-POWERED PIN NAILER 058-8122-6...
  • Page 8 Handling and storage of oil: Use with adequate ventilation. Avoid contact of oil with eyes, skin, and clothing. Avoid breathing spray or mist. Store in a tightly closed container in a cool, dry, well-ventilated area free from incompatible substances. AIR-POWERED PIN NAILER 058-8122-6...
  • Page 9 Note: Recycle unwanted materials rather than disposing of them as waste. Sort the tools, hoses, and packaging in specific categories and take to the local recycling centre or dispose of them in an environmentally safe way. AIR-POWERED PIN NAILER 058-8122-6...
  • Page 10 MC-588122-01 Description Description Air inlet plug Magazine Rubber grip Adjustment lever Trigger Exhaust deflector AIR-POWERED PIN NAILER 058-8122-6...
  • Page 11 GUIDELINES FOR PROPER USE AND OPERATION ® Be sure to use a proper air compressor with Mastercraft air-powered tools. The compressor should be able to supply a minimal air delivery of 2.0 SCFM @ 90 PSI to ensure the compressor can run continuously with the Mastercraft Air-powered Pin Nailer.
  • Page 12 Failure to comply could lead to serious injury or loss of life. MC-588122-02 Description Description ® Mastercraft Air-powered Pin Nailer Regulator (0 to 8.5 bar) Quick connector Filter Quick coupler Cut-off valve Air hose Air compressor Lubricator AIR-POWERED PIN NAILER 058-8122-6...
  • Page 13 Do not attempt to clear a jammed nail when the air hose is connected. Do not drive a nail on top of an existing nail. Failure to comply could lead to • serious injury or loss of life. AIR-POWERED PIN NAILER 058-8122-6...
  • Page 14 This Mastercraft® Air-powered Pin Nailer drives 1/2 to 1" (13 to 25 mm) long nails. ACCEPTABLE NAILS (13 to 25 mm) Length: 1/2 - 1 " 1” 1/2” MC-588122-07 WARNING! Potential hazard that could result in serious injury or loss of life.

  • Page 15: Loading Nails

    1. Disconnect the tool (1) from the air (fig A) supply (2) fig A MC-588122-03 2. Adjust the adjustment lever (1) as per (fig B) the size of nail to be inserted fig B 22 25 1/2” 5/8” 3/4” 7/8” 8” MC-588122-04 AIR-POWERED PIN NAILER 058-8122-6...
  • Page 16 11 (wood density chart) MC-588122-07 6. Use plumber’s tape to avoid air leak. Verify that the air pressure is in the (see section “Technical correct range specifications”) . The tool is now ready for use. AIR-POWERED PIN NAILER 058-8122-6...
  • Page 17 2. Pull the trigger (1) to drive the nail with the safety stand (2) firmly pressed fig G (fig G) against the workpiece MC-588122-09 3. If the safety stand remains pressed, successive nails will fire each time the trigger is pulled. AIR-POWERED PIN NAILER 058-8122-6...
  • Page 19 Reconnect the air supply line to the tool’s air inlet. • Test fire 3 to 5 nails into a piece of scrap wood in order to ensure a proper operation. Note: If the nails continue to jam, call 1-800-689-9928. AIR-POWERED PIN NAILER 058-8122-6...
  • Page 20 6 drops of pneumatic tool oil into the air inlet before each work day or after every 2 hours of continuous use, depending on the characteristics of the workpiece and type of nails used. MC-588122-13 AIR-POWERED PIN NAILER 058-8122-6...
  • Page 21 • Keep the magazine and the safety tip of the tool clean and free of any dirt or abrasive particles. Note: When temperatures are below freezing, keep the tools warm using any safe, convenient method. AIR-POWERED PIN NAILER 058-8122-6...

  • Page 22: Troubleshooting

    Air leakage between 2. The O-rings or the seals are worn 2. Inspect and replace the O-rings or the seals. the bottom and the or damaged. Have the tool serviced by a qualified service cylinder cap. technician. AIR-POWERED PIN NAILER 058-8122-6...
  • Page 23 4. Open and clean the magazine. Air exhaust is being The direction of the exhaust Direct the exhaust deflector away from the directed towards the deflector requires adjustment. operator. operator. Note: For further repair information, please call 1-800-689-9928. AIR-POWERED PIN NAILER 058-8122-6...
  • Page 24 AIR-POWERED PIN NAILER 058-8122-6...
  • Page 25 MC-588122-06 AIR-POWERED PIN NAILER 058-8122-6...
  • Page 26 Valve bushing Guide pipe Compressed spring Pusher spring Trigger valve stem Bolt M4 X 4 O-ring 2.5 X 1.5 Bolt M4 X 8 Trigger valve seat Fixed slice O-ring 11.2 X 2.0 Bolt M4 X 6 AIR-POWERED PIN NAILER 058-8122-6...
  • Page 27 Air inlet plug cap Fixed lever Air inlet plug Nut M5 Spring washer 4 Rubber grip O-ring 35.5 X 2.3 If any parts are missing or damaged, or if you have any questions, please call 1-800-689-9928. AIR-POWERED PIN NAILER 058-8122-6...
  • Page 28 This warranty will not apply where damage is caused by repairs made or attempted by others (i.e., persons not authorized by the manufacturer). This warranty will not apply to any product that was sold to the original purchaser as a reconditioned or refurbished product (unless otherwise specified in writing). AIR-POWERED PIN NAILER 058-8122-6...
  • Page 29 This warranty gives you specific legal rights, and you may have other rights, which may vary from province to province. The provisions contained in this warranty are not intended to limit, modify, take away from, disclaim, or exclude any statutory warranties set forth in any applicable provincial or federal legislation. AIR-POWERED PIN NAILER 058-8122-6...

Table of Contents