Rj12 - Can Bus Connection Cable; Rj12 Pin Allocation On The Kgm; Can Bus Pin Allocation On The Kea; Connecting Kgm - Kea - Kuhse KGM - KEA Manual

Manual
Kuhse Gateway Module
KGM - KEA
11 RJ12 – CAN bus connection cable
A 2.5 metre long connection cable is provided for the connection between KEA and KGM. This is
equipped with an RJ12 plug on the KGM end and 4 flying leads on the KEA end.
11.1

RJ12 pin allocation on the KGM

Connector "CAN A/B" – KGM
Pin Function
1.2 Not relevant
3 CAN - high
4 CAN - low
5.6 GND
Connector RJ12 6p/6c, 6 x 0.5mm2
11.2

CAN bus pin allocation on the KEA

Connector "CAN 0" – KEA
Pin Function
1 GND
CAN – low
2
3 GND
CAN – high
4
Connector Phoenix Contact; 4 x 0.5mm2
11.3

Connecting KGM - KEA

From the pin allocation for the KGM and the KEA above, we have:
 KGM Pin 3 to KEA Pin 4 (colour: green)
 KGM Pin 4 to KEA Pin 2 (colour: yellow)
 KGM Pin 5 to KEA Pin 1 (colour: pink)
 KGM Pin 6 to KEA Pin 3 (colour: grey)
HB-KGM-KEA_EN Version 01
Date: 23rd. May 2017
Page 74 of 75