Installing The Cap Over The Speaker/Microphone Jacks; Installing The Optional Speaker/ Microphone - Kenwood TK-2180-K Instruction Manual

KENWOOD CORPORATION

Installing the Cap over the Speaker/Microphone Jacks

If you are not using an optional KMC-25 speaker/ microphone, install the cover over the univeral connector using the
supplied 4 x 6 mm screw.

Installing the Optional Speaker/ Microphone

1 Insert the guide of the speaker/ microphone connector into the groove of the universalconnector.
2 Secure the connecter in place using the attached screw.
TK-2180-K, TK-2180-K2 FCC ID:ALH37323110
TK-3180-K, TK-3180-K3 FCC ID:ALH37333110
IC:282D-37323110