SYSTEM CONFIGURATION GUIDE
Server Management
The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system
management features listed in the table below.
Hardware
monitoring
Boot monitoring
Alerting
Remote KVM
(via LAN)
Remote control
(via LAN)
Others
Industry standard
1
The feature is not supported on VMware ESXi systems.
2
Some setting items can only be changed.
NEC Corporation
–
NEC Express5800/B120f
Temperature, voltage, power, drives,
degeneration (memory, hard drive)
Hardware event log collection
Booting, BIOS/POST stall, OS stall, shutdown
HW error, Boot error and OS panic
(by SNMP, E-Mail)
POST/BIOS setup, DOS utility
Panic screen, Boot screen
Text-based screen (OS console)
GUI-based screen (OS console)
Remote reset/power on-off/ dump
Power control
BIOS and BMC Firmware update
2
BIOS setting
OS shutdown
Remote media (CD/DVD, FD, USB Key)
CLP (Command Line Protocol) (DMTF compliant)
Remote control via Web browser (multi user
login at the same time)
Scheduling (without UPS)
Set automatic IP address via DNS/DHCP
LDAP/Active Directory verification/user control
Clock synchronization of main unit and the RTC
Access log collection
IPMI
Revision 2.3 – February 24, 2017
Standard
1
1
1
2.0
17