Setting the Date and Time
Press the menu button, then select "Date Setup" by pressing
Then, press c to select "Date Set" and press the confirmation button
again.
Press the confirmation button.
The confirmation screen appears.
Inserting and Removing Card
(When recording still pictures)
Always turn off the power before inserting a card.
Open the cover.
Push the card in until it clicks into place.
(To remove the card, push it in slightly and release.
The card will pop up, and you can remove it.)
Always close the cover.
Select each item by pressing
and set the correct value by pressing
/
.
f
e
• Repeat this step until year, month,
date, hour, minute, and AM/PM are
correctly set.
Press
to select "YES", then press
d
the confirmation button to confirm.
• If you select "No" and press the
confirmation button, the screen
returns to step
Label side
Insert the card with the label side
face up.
f
/
e
.
/
d
c
.
4