Related Manuals for Home Science Tools BS-2610
Summary of Contents for Home Science Tools BS-2610
-
Page 1: Operating Instructions
BS-2610 Triple Beam Balance Operating Instructions 665 Carbon Street, Billings, MT 59102 Phone: 800.860.6272 Fax: 888.860.2344 Web: www.HomeScienceTools.com Copyright 2005 by Home Training Tools, Ltd. All rights reserved. -
Page 2: Specifications
Construction and Application This triple-beam balance is constructed to provide years of reliable, trouble-free operation. The beam is made of high-quality aluminum alloy for precise, consistent results. It has a tiered design for better visibility and faster operation. The agate beam bearings and steel knife-edges provide high accuracy, repeatability, and durability. - Page 3 Setup and Zeroing 1g Weight Pointer 100g Zero Knob Beam Beam Dampening System Attachment Attachment Weight Weights After placing your balance on a smooth, flat surface, move each of the three sliding weights to the zero position on the left side of the beams. Be sure the 10g and 100g sliding weights are fully seated in the notches cut into the beams near the “0”...
-
Page 4: Weighing Operation
Weighing Operation Place the object to be weighed on the center of the pan and proceed as follows: 1. Starting with the center beam, move the 100g weight to the right one notch at a time until the pointer drops. Then move the 100g weight back to the left one notch.
Need help?
Do you have a question about the BS-2610 and is the answer not in the manual?
Questions and answers