GUID-98F27B1C-9F09-48EC-83D7-FC85C825E6A4
Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-6F09C935-27D9-45D4-AFD9-6B73D50DC0FA
Procedure
1
Using the alignment posts, place the I/O board on the palm rest and keyboard
assembly.
2
Align the screw hole on the I/O board with the screw hole on the palm rest and
keyboard assembly.
3
Replace the screw that secures the I/O board to the palm rest and keyboard
assembly.
4
Connect the I/O board-cable to the system board and close the latch to secure
the cable.
GUID-FC885216-4D9B-490B-8E29-934447E8E5D4
Post-requisites
1
Replace the
base
2
Replace the
optical
44
computer. After working inside your computer, follow
After working inside your
cover.
drive.
computer. For more safety best
www.dell.com/
Before