Before Operating - Walker H12 Operator's Manual

BEFORE OPERATING

1. Read and understand the contents of this Operator's Manual before operating the machine. Become
thoroughly familiar with all controls and how to stop the machine and disengage the controls quickly.
Replacement Operator's Manuals are available by sending the model and serial number to:
2. Never allow children to operate or give rides on the machine. Do not allow adults to operate without
proper instruction.
3. Do not allow anyone other than the operator on the machine.
4. Keep everyone, especially children and pets, a safe distance away from the area being cleaned. Do not
operate with bystanders in the area.
5. Do not operate the machine wearing sneakers, tennis shoes, or similar lightweight footwear. Wear
substantial protective footwear that will improve footing on slippery surfaces.
6. Snow or leaves can sometimes hide objects that might clog the snowblower, or otherwise cause damage.
Clear the area of doormats, sleds, boards, wires and other debris.
7. Do not wear loose fitting clothing that could get caught in moving parts. Always wear adequate protective
clothing including long pants. Wearing safety glasses, safety shoes, and a helmet is advisable and required
by some local ordinances and insurance regulations.
8. Prolonged exposure to loud noise can cause impairment or loss of hearing. Operator hearing protection
is recommended. Wear a suitable hearing protective device such as earmuffs or earplugs.
9. Keep all protective shields and safety devices in place. If a protective shield, safety device, or decal is
damaged, unusable, or missing, repair or replace it before operating the machine.
10. Be sure any interlock switches are functioning correctly so the engine cannot be started unless the
Forward Speed Control (FSC) lever is in the NEUTRAL position and the PTO clutch is in the DISENGAGED
position. Also, the engine should stop if the operator lifts off the seat with the PTO clutch in the ENGAGED
position.
11. Never attempt to make any adjustments while the engine is running, except where specifically instructed
to do so.
Walker Manufacturing Company
5925 E. Harmony Road
Fort Collins, CO. 80528
2