NEC SL1100 Networking Manual page 35

NEC SL1100
5.
Password
12345678
H
S 3
OW TO
ECTION
To exit the programming mode:
To exit programming mode, first exit the programming options mode.
1.
2.
3.
Networking Manual
Dial the system password + Hold.
Refer to the following table for the default system passwords. To change the
passwords, use 90-02: Programming Password Setup.
User
Name
sltech
0000 ADMIN1 3 (SA)
9999 ADMIN2 4 (SB)
E P
XIT ROGRAMMING
Press Mute to exit program options, if needed.
Program Mode
Base Service OP1 OP2
Press Speaker. If changes were made to the system programming, Saving
System Data is displayed.
When completed, the display shows Complete Data Save and exits the
telephone to idle.
To save a customer database, a blank Compact Flash (CF) is required.

Insert the CF into the CD-CP00-US and, using Program 90-03, save the
software to the Compact Flash. (Program 90-04 is used to reload the
customer data if necessary.) Note that a Compact Flash can hold only one
customer database. Each database to be saved requires a separate card.
Level
2 (IN) Installation(IN): All programs in this section not listed
for MF, SA, and SB
System Administrator - Level 1 (SA):
10-01, 10-02, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17,
10-18, 10-23, 10-24, 10-25, 10-28, 10-29, 10-45, 12-02,
12-03, 12-04, 12-08, 15-01, 15-07,1 5-09, 15-10, 15-11,
20-16, 20-34, 21-07, 21-14, 22-04, 22-11, 22-17, 25-08,
30-03, 30-04, 32-02, 45-02, 84-22, 90-03, 90-04, 90-06,
90-07, 90-19, 90-57, 90-58, 90-59, 90-65
System Administrator - Level 2 (SB):
13-04, 13-05, 13-06, 13-11, 15-14, 21-20
M
ODE
Programs at this Level
Issue 6.0
5 - 3