Turning On Your Zepp 2 Sensor; Pairing Your Zepp 2 Sensor; Mounting Your Zepp 2 Golf Sensor; Flash Storage Capability - ZEPP GOLF User Manual

Turning on your Zepp 2 Sensor

Hold the power button for 4 seconds to turn it on. The Zepp 2 sensor LED light will
blink twice and remain off during use. You can capture swings while the sensor is in
this mode. Click the power button once and the LED light will blink 3 times which
will indicate that the sensor is powered on and able to record swings.
The Zepp 2 sensor will automatically power off if no swings have been taken for 15
min.
Pairing your Zepp 2 Sensor to your mobile device
Enable bluetooth on your mobile device
1.
Login or Create an account in your Zepp Golf app
2.
Tap Training menu icon
3.
Tap 3D Swing Analysis
4.
Tap Zepp 2 sensor icon on the top left of the screen
5.
In "My Sensor" menu tap Zepp 2 sensor icon in the right hand corner of screen
6.
Turn on your Zepp 2 sensor
7.
ZEPP GOLF USER GUIDE
Your Zepp 2 sensor will be discovered under "Discovered Sensors"
8.
Tap the sensor name to connect
9.
Zepp 2 sensor is now connected
10.
Mounting your sensor
Put the sensor in the golf mount and turn clockwise until the sensor locks into the
golf clip. After you have inserted the sensor, attach the mount to the glove by sliding
it over the tab of your glove so that it fits squarely in the center.

Flash Storage Capability

The Zepp 2 sensor has two different modes.
When the app is connected to the Zepp 2 sensor you will notice
Online Mode:
that the sensor icon will be solid yellow in the app.
Offline Mode: This is when the sensor is turned on but not connected to the
app.
For Zepp Golf, it is recommended to operate in online mode since the club you
swing with is regularly changed and the length of the club is used to determine the
club head speed metric.
In online mode, the Zepp 2 sensor is connected to the app on your mobile device. All
captured swings are stored immediately and saved to the app. If you lose connection
of capture swings. In offline mode, all your swings will be stored locally on the sen-
sor until you reconnect the app again. Once reconnected to the app all the swings
stored on the sensor will be synced to the Zepp Golf app
You will be presented with a "Sync Data" dialog box that will ask you to "sync now"
or "Disregard". You can choose which user to sync the data to from this screen.
Page 5